Register To Comment
Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 41

Thread: Im new

  1. #11
    Guest
    @Alex

    Yeah i did know it came without a reciver.Its called a sky sports 4.Link-

    http://www.technobots.co.uk/acatalog/Online_Catalogue_4_Channel_Technobots_40MHz_251.ht mlhttp://www.technobots.co.uk/acatalog...chnobots_40MHz _251.html

    Thanks.

    Dan.

  2. #12
    Dan, firstly, welcome to the club!

    There is a difference between nicads and nimh. It is to with performance.

    Basically if you are going to be going heavy on the current draw then go for nicads, they are far better at delivering large amounts of current in a hurry. Nimh will probably be better for your application as you wont be using your drive heavily in a flipper.

    Nimh weigh less for the same voltage and capacity as well however they have one flaw. They have a memory. All cells have some form of memory, this means that they remember what level they were discharged to. So if you only discharge cells half way and then charge them and repeat this over and over then your cells will slowly lose their capacity.

    This is removed by fully cycling the cells, ie running them flat and then charging them fully.

    Dont worry about half discharging cells during competitions etc as they will take a bit of abuse but whenever you can, you should always fully cycle your cells.

  3. #13
    kane's Avatar
    Roboteer

    Just to clarrify a point:

    NiMH suffer from very little memory effect. More so, NiCds need to be cycled to prevent the memory effect.

    NiCds are the only cell you should cycle. Other cells can be damaged by frequent cycling. NiMHs can benefit from cycling once in a while.
    Kane Aston
    http://www.makerobotics.com

    Co-owner and builder of BEHEMOTH

  4. #14

  5. #15
    http://www.modelpower.co.ukwww.modelpower.co.uk 7.2 niMhs 3.9 amps

    2 for £30

  6. #16
    Guest
    I have 25a viper marine speedos with the drill motors off gimson robotics-

    http://www.gimsonrobotics.com/shop_dc-electric-motors.htmlhttp://www.gimsonrobotics.com/shop_d...ic-motors.html

    I want some ni-mhs for this but how much power will i need?

    Will i need just one battery or two?

    Thanks.

    Dan.

  7. #17


  8. Guest
    LOL!Your right,money is the biggest problem!I think it will be a bit easier for me,because my dad is paying half and im paying half!Still a problem though!

    What are your design ideas David?

    Any pics of your feathers Erik?

    Thanks.

    Dan.

  9. #20
    the best thing to do i found is plan then save, always have spare money for repairs

    but i agree it is certainly hard at our age!

    alex

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •