Register To Comment
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25

Thread: Radio signal

  1. #11
    http://www.fightingrobots.co.uk/documents/emi.pdfhttp://www.fightingrobots.co.uk/documents/emi.pdf

    10 nf max across between the motor terminals ...page 4 / 5

    There is LOADS of other info in the document that should help you solve your problems.

  2. #12


  3. What is the overall length of your ariel? If memory serves it should be about 40cm long.

  4. #15


  5. Well I was 1/2 right. Anyway 89cm is an impractical length.

  6. #18
    89cms impractical? Try a full wavelength antenna, now thats impractical.

    On the subject of reception in Roberts robot: Try
    shielding of the antenna on the inside of the robot, the external antenna is fine, but if the antenna that is left on the inside picks up noise from everything in the robot that good signal has less a chance of coming through.

    We shielded out antennas in the past (before we went to 2,4GHz) by using coax cable for ethernet (RG-5, the antenna in the middle, and a nice wiremesh shield around it to stop outside interference. It helped a lot.

  7. #19
    also, shorten the distance between external antenna and reciever if possible, you antenna length is now effectivaly longer then its regular length because you need to add the length of the outside antenne with the inside. if the outside antenna is already tuned for 40MHz, you should only have something like 10 cm on the inside.

  8. #20

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •