Electronize electronic switcher

**psycho_fling** · 25th July 2007, 17:22

hi

rewiring my lifter motor micro switches and the electronic switcher, bit stuck becuase, i know that the Nc goes to the power but does one go to the postive of the power distributor and the other to the negative? if yes which way around?

i have put a pic on my site, robot improvements

http://www.psychoflingteam.co.ukwww.psychoflingteam.co.uk

alex

**psycho_fling** · 25th July 2007, 17:44

put a better explanation next to the picture, might help

**woody** · 25th July 2007, 18:48

Email sent with pic.

**psycho_fling** · 27th July 2007, 11:12

i have found some instructions that i think might help on the technobots site, but it isnt working the download i mean, could someone see if it works for them and email it to me? i dont know if this is the problem but technobots have discontinued the zeobot range

anyway if anyone has any luck please post

cheers alex

**psycho_fling** · 27th July 2007, 15:50

its ok now i have got it to work! (the download)

**psycho_fling** · 28th July 2007, 08:40

i have got the lifter working, well working as in the mechanism moves up and down at quite a fast speed, although i seem to be getting a bit of interference which make the lifter motor move in bits, any ideas? also when the lifter is working the drive mototrs seem to twitch?

any thoughts welcome, i wont be able to respond for over a week as im off on my hols

thanks alex