EnigmaTek 2.0

[knightrous]

Okay... Heres the dealio... Ive got a week holidays from Wednesday, no work, so I have some time...

This is a mini tourny. With the same basis as AJWars: A New Era... BIIBI.

I need 8 people to enter a bot each. 100kg Heavyweights. RFL Rules (botleague.net), only change to these rules are, clusters get a 10% weight bonus (110kg combined), No Walkers/Flying bots. The arena will be the Combots Box from the USA.

Ill be picky on stats, but Ill be throwing suggestions on how to fix them when I do.

Get crackin plz k thkz.

[dogbot4000]

Umm nothing about not entering realies so Ill enter S3.

[RogueTwoRobots]

quote:

This is a mini tourny. With the same basis as AJWars: A New Era

And from the AJWars: A New Era thread:

quote:

real robots are obviously not permitted as they kind of defeat the object.

So, on a technicality, he does mention something about realies not being allowed

Unless of course Aaron chooses to allow them

[andrewj]

Oooh, this was unexpected. Save me a place please while I get to work on a new design.

[knightrous]

No Realies...

7 spots left...

AJ - Reserved...

[alex_holt]

Im going to be boring and enter achilles. Partially because I suspect it should be the simplest to fix of all the robots that Aaron could tear apprt on technicalities, lol.

ww.alexjholt.tk as usual.

[majinb]

much like AJWars: A New Era eh?

guess Liarll do then

http://strickenone.proboards99.com/index.cgi?board=thvapourshttp://strickenone.proboards99.com/i...oard=thvapours

[knightrous]

quote:

Weight: 100kg

Shape: box, slightly thicker than tornado, not double sided, sides skirted like PA, back curved for more efficient srimech (like the original hydra), front is sloped at 45 degrees

Wheels: Four inner wheels like tornados but the wheels are only half the width covered in highly treaded rubber grip to maximise traction, runs on a similar drive system to tornado as well.

Motors: 2x Eteks at 48v.

Speed: 18mph,

Turning circle: 0m

Armour: 5mm titanium and on top 10mm of vulcanised rubber to stop axes and crushers

Ground clearance: 0mm at front and sides, 1mm at the back but difficult to get too due to overhanging curve.

Weapons: Uses a single really powerful hydraulic lifting arm to life opponents of up to 200kg into the air and tip over up to 500kg. To get under the opponent it has a Bigger Brother style lifting plate which runs parallel to the ground resting upon it which give the machine a really low ground clearance. So it can get under virtually anything.

On top of the lifter is a hook mechanism which looks like a tiny claw but performs the same gripping effect as the top mounted behemoth axe. It is not particularly sharp as it is not designed to cause damage, just to grip the opponent.

The hydruallic mechanism can be exchanged for high pressure pnuematics against other rambots and things too fast to be allowed to be lifted. The pressure is 500psi in two canisters giving 1000psi in total, also with weight saved from the hyrdualics I remove the claw and add a t shaped bar at the back to self right whioch saves me using up C02.

Loose the Eteks, or loose the weapons :P Think youd be over weight with 20kg of drive motors and gearing plus a 25+kg weapon system :P Suggestion. S28-400 Magmotors @ 24v and aim for around 15MPH.

The volcalon top armour will be add a fair bit of weight, youd probably get the same effect with 6-10mm of polycarb, but without the weight.

Also, 2 x 500psi canisters doesnt equal 1000psi ;-) Id also like to see some information on batteries.

Otherwise, I think youve got yourself a spot

quote:

Name - Liar

Shape - A bit like a non-invertible Wheely Big Cheese, it has a fairly wide wheel-to-wheel base at the back, while the front is a much smaller (and pretty long) wedge, the front of the wedge has to €œside wedges€ as can be seen on the pic

Weight - 100 Kilogram

Speed - 29 km/h (18mph)

Dimensions - 120x60x30 cm

Ground Clearance - 0 mm at the front and underneath €œside-wedges€, 7 mm anywhere else

Power - 2 S28-400 Magmotors at 24 volt

Movement - 2 inner wheels, 15 cm in diameter

Turning Circle - Zero

Weaponry - The wedge contains a 1000 psi titanium rear-hinged flipper (basically the red parts of the picture), powered by two pneumatic rams. It should be able to give a 100 kg robot a height of some meters. As can be seen in the picture, the flipper has two €œside-wedges€. I have added them since I saw that flippers tend to be quite weak when attacked at the back. When Liar is attacked at the back, he simply does the same as Stinger does when he goes into flail mode. By doing so, the side wedge will ram into the opponent and shove underneath it. That way I can use my flipper and get it on his back. Although this flip will not be as powerful as a frontal flip, it will be a flip nonetheless, and it will help me get rid of any threats that approach me from the back.

Armour - 8 mm titanium all around

Srimech - That flipper

Information on batteries and some more information on that weapon. What size ram (Bore & Stroke) and how much CO2 onboard? (If your just cloning WBC, I think it was 50mm B x 300mm S and a single 2KG CO2 Tank)

Otherwise, the rest of it looks good enough to reserve your place :-)


5 spots left

AJ - Reserved - Needs entry...
Alex - Reserved till Tech Pass
Martijn - Reserved till Tech Pass

[dogbot4000]

Ill enter D-J stats in help with vapour thread the latest not the initial idea mind you.

[kodster]

Twil be interesting to see what Aaron can find wrong with my bot.

Hyper-Insomnia-Para-Condrioid

http://strickenone.proboards99.com/index.cgi?board=heavies&action=display&thread=1181 317215http://strickenone.proboards99.com/i...display&thread =1181317215

Nitpick to your hearts content.