Powerpole

[antrock101]

http://www.gimsonrobotics.com/shop_power-connectors.htmlhttp://www.gimsonrobotics.com/shop_p...onnectors.html

can anyone tell me how to put these together im confused, ant

[maddox]

each powerploe is 2 parts. The plastic housing and a conductive inner contact.

First you crimp/solder a wire to the inner contact.
Then you push that inner contact in the housing. But, there is only 1 correct way.
If you look in the housing, youll see a small metal spring. And the contact has a lip on the front. That lip has to go just over that spring.
So, if the orientation is correct, you can push the contact in the housing, and youll feel a small snap when it is done well.

Also, every powerpole has 2 sides with a protuding part, and 2 sides with a groove. You can slide those in each other.

Think if you look on the RS website you can download the instructions as well.

[kane]

The data sheets are also on the http://www.andersonpower.com/product...e.htmlAnderson

[mattan]

Add a little superglue before you pushing the housings toghether and they STAY togheter.