Me!

Featherweight:

Wuzzel
Undercutter spinning Ti bar powered by a Magmotor S150 @ 24V
Drive is 2 speed 720 BB torque motors @ 12V
Armour is 5mm Aluminium

http://www.computerclub.nl/uploads/fanfic/wuzzel.jpghttp://www.computerclub.nl/uploads/fanfic/wuzzel.jpg

lightweight:

Fuzzel
Eggbeater type spinner powered by a 24V Brushless motor (13000 rpm max) and a Phoenix 100A brushless ESC.
Drive is 2x speed 900 BB torque motors on 24V
Can drive on its back, but beater only spins 1 way.
Armour and chassis is 15mm HDPE.
http://www.computerclub.nl/uploads/fanfic/fuzzel.jpghttp://www.computerclub.nl/uploads/fanfic/fuzzel.jpg

Middleweight:

Nuzzel
Pnumatic Axe low pressure with a 16 bar ram 50mm bore 150mm stroke (318 kg impact, 187 kg return).
Drive is 2 carfan motors on 24V
Armour is 40mm HPDE, frame is 30x30mm box section steel.
http://www.computerclub.nl/uploads/fanfic/nuzzel.jpghttp://www.computerclub.nl/uploads/fanfic/nuzzel.jpg

Superheavyweight:

Puzzel
Pnumatic flipper full pressure
140mm bore x 120mm stroke giving 8 tons of force @ 50 bars
2 bottles of 2kg of co2 feed into a double buffer system to prevent liquid loss and optimal efficiency.
drive is 2 perm motors geared down 20:1 on 24V.
Armour is 3.2 mm hardox all round and additional 40mm HDPE at the back. The bottom plate is 10mm aluminium 7075.
http://www.computerclub.nl/uploads/fanfic/puzzel.jpghttp://www.computerclub.nl/uploads/fanfic/puzzel.jpg