New Blood... New Beginning...

[andrewj]

New Blood€¦ New Beginning€¦

Okay, new tournament as I€™ve decided I€™m getting back into things. I€™m not bothering to write any rules or anything so I€™ll give some basic guidelines. You€™ll catch on hopefully.

- I need 8 people to enter 1 new vapourbot each (well 7 people, cause Im entering)
- However this vapourbot must be brand new and never competed anywhere else before
- Usual rules apply and battles will take place in the RW arena
- Looking for anyone in the tournament to help with writing battles, please volunteer if you would like to write a couple of fights (however everyone in the tournament must write at least 1 battle)

That€™s all I can think of, ask if there€™s any questions, go!

[martyn]

NAME- Disco tech 3
SHAPE- Invertible box
COLOR- silver
WEIGHT- 100kg
SPEED- 20mph
TURNING CIRCLE- 0mm
GROUND CLEARANCE- 9mm under the discs has 0mm at sides due to skirts that will work when flipped
ARMOUR- 3.6mm hardox
WHEELS- it has 4 inner wheels
POWER- Drive: 2 x S28-400 Magmotors @ 36v with a 10:1 Mod 2 spur gear reduction connected to the 6 wheels.
Batteries: 120 x 3000mAh NiCD cells producing 36v @ 9amp
WEAPONS- It has 2 horizontal flywheels (think 13 black) each spinning at 2500rpm. Has a 4.00 second spin up time due to the C40-500 Magmotor on 36v with a 2:1 twin tension cog belt reduction. The flywheels produce 31.5Kj€™s at maximum RPM but is lethal at around 1 second. It has one weapon on the front and one on the back
SRIMECH- Invertible
NOTES- can spin on the spot
STRENGTHS- It is stunning
WEAKNESSES- easy to flip if discs aren€™t spinning

[andrewj]

Thanks Martyn!

1) AJ - ?
2) Matty - ?
3) Steve - ?
4) Martyn - Disco Tech 3
5) ? - ?
6) ? - ?
7) ? - ?
? - ?

[steven_mcg]

Ladies and gentlemen, the latest disasterpiece from Team Braveheart!

NAME- The Riddler
SHAPE- bowler hat with a small scoop shape at front and back
COLOUR- green with a white band, purple question mark at front
WEIGHT- approx 100kg
DIMENSIONS- 90cm X 90cm X 35cm
SPEED- 15mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- approx 0mm for scoops, 8mm all round elsewhere
ARMOUR- 4mm Grade 5 titanium
MOVEMENT- 4 inner wheels
POWER- 2 x C40-500 MagMotors. These will run at 36v and produce approximately 12hp.
WEAPONS- 180 degree pneumatic axe with twin heads, appears similar to a walking cane. It is powered by 2 x CO2 tanks running at 160psi and uses the rack-and-pinion mechanism. Hopefully, the hammer can produce between 30-40 blows per fight.
SRIMECH- the axe
NOTES- flies the Scotland flag
STRENGTHS- fast and manouverable, a mighty thwack, good pushing power
WEAKNESSES- possible spasms, limited blows, average armour for the Hardox Age, stats may be complete rubbish

Piccy here: http://img296.imageshack.us/img296/3128/theriddlervapourbotza1.pnghttp://img296.imageshack.us/img296/3...pourbotza1.png

Hope thatll do, Mr J and welcome back to Bedlam!

(Message edited by Steven_McG on December 24, 2006)

[dinowarrior]

Ill give it a shot. Ill give you details in a moment or two.

[majinb]

amazing Andy, please reserve me a spot

[alex_holt]

Ooh.....hold me a spot....I need to get my creative brain in gear....

[dinowarrior]

NAME: Flipperdont 2
WEIGHT: 100 kilos
BODY SHAPE: Spawn Again
SPEED: 12mph
TC: 0
GC: 0mm at the flipper plate, 2mm at the side, 3mm under the flipper and blocker.
WHEELS: 4 inner
ARMOUR: 6mm titanium
POWER: 3x 12v batteries, powered by some MagMotors...you know, the usual.
COLOUR: Layers of Black, Grey, Red and Yellow, with a Grey flipper and Black blocker.
WEAPONS: An enourmous front flipper capable of tossing about half a ton. It can literally flip a robot out of the arena halfway from the arena...and trust me, Ive seen it do it. No, seriously.
SRIMECH: The flipper acts as a srimech. To prevent it getting stuck on its back, a rectangular blocker has been installed, preventing it from getting stuck. It is extremely successful.
NOTES: If youre wondering how I actually make these claims, its this...the prototype has been made of Lego bricks. I have a whole army of home-made robots which battle each other and Flipperdont 2 is easily one of the most successful.
STRENGTHS: The flipper!
WEAKNESSES: For some reason, it doesnt do well against high-speed full-body spinners.

[kodster]

Ill steal a spot. Since hardly any of my vapourbots are new and many of them havent competed...I think Ill enter Entropy. Stats can be found on my forum:

http://strickenone.proboards99.comhttp://strickenone.proboards99.com

If you need stats posted here, then Il do it. Cheers!

[alex_holt]

NAME- Dakkon
SHAPE- Difficult to describe - think a smooth Sumpthing with a front scoop. Ill try to knock up a picture.
COLOUR- A greenish-grey with flecks of silver
WEIGHT- approx 100kg
SPEED- 18mph
TURNING CIRCLE- 0m
GROUND CLEARANCE- Zilch for front as is has a titanium strip, the rest varier at over a centimetre
ARMOUR- Front plate is 6mm hardox, the rest however is 7mm aluminium over a titanium chassis.
MOVEMENT- 2 large wheels behind the front plate, again similar to Sumpthing.
POWER- 2x 750 watts Bosch motors at 24v.
WEAPONS- A huge single edged pnuematic axe - the recoil is only enough to self right it, and the blade is a quarter circle and weights 5kg, with sections cut out of it to decrease weight. It works similar to terrorhurtz - ie attempts to mash things apart, but only in one direction. It uses four canisters streamed into the piston to produce its power.
SRIMECH- The axe does it all - there are side struts from the shaft to aid it in this.
NOTES- Other than having a bizarre shape isnt very creative for me - but there again I havent had any losses to react against with my scheming
STRENGTHS- Powerful, decently fast, the front armour should protect it from spinners
WEAKNESSES- Back vulnerable to flippers and most things, will probably dance like terorhurtz a bit, axe could get stuck in certain things like wood.

Ill need to make up a picture of it, which Ill do this week with any luck.