Hi all,

Thanks for answering my questions. It seems drill motors are the favorite for my first machine. Im a great believer in learning to walk before running.

Another question - a bit premature as I havent bought any bits yet, but solder or crimps? I previously worked as a hardware technician for a company that got involved with electronics and electronics that moved. We found that one of the main failures out in the field was due to metal fatigue on the solder joint - but not where the solder met the PCB, where the solder finished up the wire - not sure if it was due to the disimilar metals or because the solder was stiff and the wire was flexible creating a stress point. Does anyone have an opinion?

Cheers

Pete Curtis