Motors for a featherwight battlebot

**leorcc** · 9th August 2006, 19:43

More volts is better in your case, but it is still possible. How much weight do you have left? Belt drive is better for the disk motors.

9th August 2006, 19:51

im still disining the robot on paper (its my first one im desining by myself) i have not calculated the weigh jet, but im gonna do it soon...

and from the gold motors to my weels also beld or is it better to juse chain then?

**dragonmaster_1** · 9th August 2006, 21:09

Stats for HTI
Power 0.35 hp @12v 1.43 hp @24v
Torque 0.47 lbf*ft @12v 0.97 lbf*ft @24v
Efficiency 70% @12v 76% @24v
Speed 1260 RPM / Volt
Voltage 12 volts or 24 volts*
Weight 11 oz.
Output Shaft 5mm dia x .75 long
Diameter 1.7
Length 2.8 (from face)
Face Mount 2 M4 holes 1.14 apart

10th August 2006, 08:00

ok so its beter to juse belt drive everywhere...
i will take a look how the HTI motors will preform on 14.4 vols, and if it prefomes bad ill take 24 volts...

10th August 2006, 08:32

what is better to juse timing belts:

http://www.robotmarketplace.com/marketplace_timing.htmlhttp://www.robotmarketplace.com/marketplace_timing.html

or this belts:

http://www.robotmarketplace.com/marketplace_timing.htmlhttp://www.robotmarketplace.com/marketplace_timing.html

and witch pitch do i need(if i take timingbelds)
a 0.080 Pitch or a 0.200 Pitch?

**maddox** · 10th August 2006, 13:46

The smallet the pitch, the smaller the pullies can be. The smaller the pully, the lower the weight.
Also, why would you order a thing like that in the US, and paying lots of taxes and transport, when this is stuff you can find localy.