Mixer

[psycho_fling]

is this a cheaper alternative to the v-tail mixer on technobots? i.e. is it suitable for a feather

http://cgi.ebay.co.uk/V-Tail-Mixer-less-than-7grams-Radio-Control-RC-Plane_W0QQitemZ170008808988QQihZ007QQcategoryZ1916 4QQtcZphotoQQssPageNameZWDVWQQrdZ1QQcmdZViewItemhttp://cgi.ebay.co.uk/V-Tail-Mixer-l...RC-Plane_W0QQi temZ170008808988QQihZ007QQcategoryZ19164QQtcZphoto QQssPageNameZWDVWQQrdZ1QQcmdZV iewItem

[josh]

ye that will be fine just connect it as ur two speed contoller plugs to the rx and plug ur speedcontroller plugs into the 2 sockets on the v tail mixer

be aware that some vtails dont give you 100% turn rate.
this is to allow the plane they are meant to be in have some pitch control while rolling.
in a robot this mean you do not always get full turn rate, and in some cases not even full throttle.

double check this, unless this is a positive feature for your robot (can be in very fast/powerful robots that may turn too fast to control properly)

so what you are saying is, that it might make the robot not go as fast as it could and wont turn properly? how do we check?

thanks