Wanted: 18v drill motors

[razerdave]

Hi everyone. I know this should be in the Wanted section, but I didnt know if the feather builders read that, so I stuck it here instead.

Im after some 18v drill motors, as I do not think that the 12v ones for the pods that I ordered from Mr Cooper will cut it at 24v (I want my bot to have a lot of power), so I wanted something that can handle it for a 3 minute fight on an almost continuous basis.

Thanks in advance

David Weston

[aliboy]

Go to your local wooloworths / Argos and try and find some cheap cheap 18 v drills . I got about 6 from woolies and im using 4 in my feather and it is perfect driving at 24v

Where can one get spare reverse threaded screws for drill motors. Im always losing mine :sad:

David I may have 3 18v drill motors. I did have 4 but burnt one out when running it for a solid 10 minutes (I like to see how far I can push things).

I will get a pic for you if you want?

[typhoon_driver]

O and just so you know David, these are the motor only. No gearbox. There is a small gear on the end of the motor shaft but no gearbox.

[razerdave]

thats ok Gary, most drill motors fit into similer gearboxes, so Im only replacing the motors that come with the set James is sending me. So how much ? and yes, a pic would be nice, thanks .

[typhoon_driver]

£3.50 a motor plus postage? (that will probably only another £2)

[razerdave]

thatll be fine

Just e-mail a pic and your address to the e-mail addy on my profile, thanks

[typhoon_driver]

email sent

[razerdave]

thanks Gary. So these motors can handle 24v without a problem ? I dont want them burning out in mid-fight