Register To Comment
Page 6 of 21 FirstFirst ... 4567816 ... LastLast
Results 51 to 60 of 206

Thread: Velociraptor's Fanfic Tournament - Series 7!

  1. #51

  2. #52

  3. #53

  4. #54
    This will be my 5th entry for the main tournament, and my second entry for the annihilator:

    Name - Flick of the Wrist

    Shape - 6-wheeled Tornado, including the angled rear to keep in contact with the ground while driving up a wedge

    Weight - 100 Kilogram

    Speed - 35 km/h (22mph)

    Dimensions - 120x80x20 cm

    Ground Clearance - 10 mm under the main body, variable clearance under the lifting spikes, with 0 mm as a minimum

    Power - 2 B42-500 Magmotors at 48 volt

    Movement - 6 wheels for awesome traction

    Turning Circle - Zero

    Weaponry - A pair of hardox, diamond tipped electric lifting spikes, a lot like the lifting spatula of American SHW Vladiator. These are 25 cm in length and can be lifted downwards which turns them into an active invertible lifting wedge. They can also be raised parallel to the floor, so they can act as a pair of classic ramming spikes. A 100 kg robot driving around at 22 mph is good for 5 kJ of kinetic energy. When this is brought onto a pair of diamond tipped spikes, this might seriously harm some armours.

    Armour - 7 mm titanium all around

    Srimech - It€™s invertible

    Strenghts - High speed rambot, awesome traction
    Weakness - Lack of devestating weapons

    Here€™s a picture: http://jupiter.walagata.com/w/madbull/Flick.gifhttp://jupiter.walagata.com/w/madbull/Flick.gif




  5. #55

  6. #56

  7. #57
    Name-Forklift 2
    SHAPE- Low box with rear anti self flipping wedge
    COLOUR- Yellowy orange
    WEIGHT- 100kg
    SPEED- 18mph
    TURNING CIRCLE- 0m
    GROUND CLEARANCE- 0mm at front due to flipper, 0mm at sides due to skirts 7mm with out, 0mm at rear due to wedge. The skirts are held down by torsion springs
    ARMOUR- 3mm hardox
    WHEELS- has 6 inner storm 2 style wheels
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- it now uses a flipping arm that works much like the matadors or Toro€™s the flipper is powered by co2 on a 120mm pneumatic ram, working at 145psi, the flipper front is pretty unique as its front is like that of a fork lift (it has 2 flat bits of metal) this is welded onto the flipper, the arm can toss robots very high and if possible out of the arena. The prongs of the forklift weapon are used to get under the corners or gaps of skirts
    SRIMECH- the flipper self rights the robot but because of the rear wedge thing it self rights like firestorm does i.e. the front wheels will go down first
    NOTES- this is a modified version of my robot from the panic attack forum.
    STRENGTHS- Power full weapon
    WEAKNESSES- limited co2

    NAME- The deer (was crusher chaos)
    SHAPE- Invertible box
    COLOR- the robot and claws are a dark green color
    WEIGHT- 100kg
    DIMENSIONS- 1m x 80cm x 25cm (l,w,h)
    SPEED- 15mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- It has 6mm at the front due to the claws and has 0mm at the sides and rear without skirts 6mm. The skirts also work both ways up.
    ARMOUR- 3.6mm hardox
    MOVEMENT- 4 inner wheels that make the robot invertible
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- it has a front pair of horizontal hydraulic crushing claws set up like deers antlers like you fine in extreme destruction. The claws have 3.5 tones of crushing force on the front tips of the claws at the middle is 6tones and right at the back it has 8 tones of crush. The claws are powered by hydraulics through a 120mm bore rams at 3000psi
    NOTES- invertible, wide base means I wont topple while the deer is crushing
    STRENGTHS- Very powerful weapon
    WEAKNESSES- it could be turned into venison

    NAME- Disco tech 2 (replacing disco 5)
    SHAPE- Invertible box
    COLOR- silver
    WEIGHT- 100kg
    SPEED- 20mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 6mm under the discs has 0mm at sides due to skirts that will work when flipped
    ARMOUR- 3.6mm hardox
    WHEELS- it has 6 inner wheels
    POWER- Drive: 2 x S28-400 Magmotors @ 36v with a 10:1 Mod 2 spur gear reduction connected to the 6 wheels.
    Batteries: 120 x 3000mAh NiCD cells producing 36v @ 9amp
    WEAPONS- It has 2 spinning each spinning at 3000rpm. Has a 4.00 second spin up time due to the C40-500 Magmotor on 36v with a 2:1 twin tension cog belt reduction. The flywheels produce 31.5Kj€™s at maximum RPM but is lethal at around 1 second. It has one weapon on the front and one on the back
    SRIMECH- Invertible
    NOTES- can spin on the spot
    STRENGTHS- fast, powerful weapons, good pushing power
    WEAKNESSES- easy to flip if discs aren€™t spinning

    NAME- King 25 (previously 25€™s revenge)
    SHAPE- Invertible disc like in the rw€™games or gyrobot
    COLOUR- The robot is yellow and the bars are grey with black tipped ends
    WEIGHT- 120kg
    DIMENSIONS- 80cm diameter X 30cm (with out the bars)
    SPEED- 8mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 6mm both ways up
    ARMOUR- the armour of the shell isn€™t much as nothing can get to it because of the weapon so it is, the armour is 3mm aluminium, the bars are made from titanium, the tips are tipped with tungsten
    MOVEMENT - The robot is a shuffler which works both ways up
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- Ok its has two interchangeable weapons the first is based on son of whyachi but not quite like it. The robot has the 3 triangle spinning bars like SoW but they are attached to the centre outer rim of the robot, the other is a sort of tornado like anti crusher cage but it is circular and runs on the floor its designed for robots with skirts and other stuff but I will explain better later, it is hinged so if flipped works both ways up (please say if this doesn€™t make sense) the weapon spins round at around 3500rpm this is designed to make a robot like SoW that cant be flipped over and immobilized the spinning outer shell is powered by 2 B42-500 Magmotors at 36volts, the bars/ skirts stick out around 1 meter which should prevent most robots from hitting the body.
    NOTES- all components are shock mounted with rubber to survive its own blows and pushy bots.
    STRENGTHS- Invertible, has powerful weapon, the top and bottom both ways can€™t be hit by axes or crushers due to the bars, may not fit in a pit
    WEAKNESSES- easy to push if weapon isn€™t spinning

    Name- Take me out (thanks to Dave for naming the robot for me)
    SHAPE- Wedge
    COLOUR- Dark grey
    WEIGHT- 100kg
    DIMENSIONS- Height: 20cm, Length: 80cm, Width: 65cm
    SPEED- around 18mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 0mm at the front due to wedge extender, 5mm at sides and rear
    ARMOUR- 4mm Aluminium Boron Carbite
    MOVEMENT- 4 inner vulcalon wheels, it uses a skid steer system like tornado
    DRIVE- 2 LEM 130€™S on 36 volts
    BATTERIES- custom 3300mAh NiCad Cell 36v BotPack
    WEAPONS- The robot has a 1000psi nitrogen flipper on a 80mm bore on a 100-stroke ram which should make around 3.5 tones at the ram (if I am incorrect please correct me) the nitrogen is stored in 2, 2.2kg canisters, the robot has around 25 flips in a fight, the flipper is on high pressure
    STRENGTHS- Powerful weapon, good drive
    WEAKNESSES- limited supply for the weapon

    NAME- Wind Chaser
    SHAPE- Invertible wedge with curved rear
    COLOUR- white with 1 pink line on each side
    WEIGHT- around 96kg
    SPEED- 25mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 0mm at the front due to wedge, 0mm at sides due to skirts 5mm at back
    ARMOUR- 4mm Hardox
    MOVEMENT- it has 6 inner vulcalon wheels
    POWER- it uses 2 x lem 130€™s on 48volts
    WEAPONS- It has a rear hinged flipping arm, powered by a lem 130 on 60volts, so it can easily get a robot out of the arena.
    STRENGTHS- Compact in size, great pushing power, powerful weapn
    WEAKNESSES- no rear skirt, no weapon when flipped.

    Panic Attack (Ex 2)
    Razer (series 6)


    Also save me a space in the other weights and anyother side events that have spaces

  8. #58

  9. #59

  10. #60

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •