Ill enter Back To Rock II

Name - Back to Rock II

Shape - A box with a slightly sloped front

Weight - 100 Kilogram

Speed - 29 km/h (18mph)

Dimensions - 90x75x30 cm

Ground Clearance - 0 at sides (due to skirts) and front, 2 mm at the back

Power - 2x Etek motors at 48 volt

Movement - Four wheels, 20cm diameter

Turning Circle - Zero

Weaponry - It has a broad hydraulic lifting arm which can easily lift 200 kg. To easily get underneath an opponent, it has two lifting plates at the bottom of the arm, one on the left end and one on the right end, instead of one large lifting plate like Behemoth.

Between the two plates, in the centre of the scoop, I mounted a vertical diamond edged Pussycat-style blade, powered by a S28-150 Magmotor, spinning upwards at approximately 3000 RPM, which will hopefully rip off some armour, or more likely, a tire, while lifting an opponent. Jamming a blade into an opponent while lifting it hopefully provides as much control over an opponent than a Behemoth-style grabbing claw/axe can, and it€™ll surely do more damage. (To avoid confusion, the blade is actually part of the lifter, so when the lifter moves up, the blade moves along).

On both sides of the bots is a pair of 5 mm titanium skirts, to make sure I won€™t get flipped very often, as hydraulic srimechs just aren€™t as fast as pnuematic ones.

Armour - 6 mm titanium all around

Srimech - The lifter self-rights the robot when needed

Strenghts - Nice weapon synergy, very high traction, low ground clearance
Weakness - Hydraulic srimech might prove to be slow

A picture can be found here: http://jupiter.walagata.com/w/madbull/BacktoRockII.gifhttp://jupiter.walagata.com/w/madbull/BacktoRockII.gif