Register To Comment
Page 4 of 5 FirstFirst ... 2345 LastLast
Results 31 to 40 of 50

Thread: Dinowarrior Destruction...Revamped.

  1. #31

  2. #32
    Name-Forklift 2
    SHAPE- Low box with rear anti self flipping wedge
    COLOUR- Yellowy orange
    WEIGHT- 100kg
    SPEED- 18mph
    TURNING CIRCLE- 0m
    GROUND CLEARANCE- 0mm at front due to flipper, 0mm at sides due to skirts 7mm with out, 0mm at rear due to wedge. The skirts are held down by torsion springs
    ARMOUR- 3mm hardox
    WHEELS- has 6 inner storm 2 style wheels
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- it now uses a flipping arm that works much like the matadors or Toro€™s the flipper is powered by co2 on a 120mm pneumatic ram, working at 145psi, the flipper front is pretty unique as its front is like that of a fork lift (it has 2 flat bits of metal) this is welded onto the flipper, the arm can toss robots very high and if possible out of the arena. The prongs of the forklift weapon are used to get under the corners or gaps of skirts
    SRIMECH- the flipper self rights the robot but because of the rear wedge thing it self rights like firestorm does i.e. the front wheels will go down first
    NOTES- this is a modified version of my robot from the panic attack forum.
    STRENGTHS- Powerful weapon
    WEAKNESSES- limited co2

    NAME- 25€™s revenge (thanks to Andy for the help on this robot) (was 25)
    SHAPE- Invertible disc like in the rw€™games
    COLOR- The shell is blue with the spinning bars being yellow with the ends tipped with red
    WEIGHT- 150kg
    DIMENSIONS- 80cm diameter X 30cm
    SPEED- 12mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 6mm both ways up
    ARMOUR- 5mm titanium/vanadium alloy with 2mm polycarbonate laminate to stop the carbon tipped discs
    MOVEMENT - The robot is a shuffler which works both ways up
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- Ok its based on son of whyachi but not quite like it. The robot has the 3 triangle spinning bars like SoW but they are attached to the center outer rim of the robot this spins round at around 3000rpm this is designed to make a robot like SoW that cant be flipped over and immobilized the spinning outer shell is powered by 2 B42-500 Magmotors at 36volts
    NOTES- This weapon idea was come up by me Martyn Forsyth and Andrew Jackson it also flies the Scottish flag
    STRENGTHS- Invertible, has powerful weapon, the top and bottom both ways can€™t be hit by axes or crushers due to the bars
    WEAKNESSES- easy to flip when weapon isn€™t spinning

    Name: Disco 5
    Shape: Low Wedge with small rear wedge
    Motivation: it now uses four storm 2 style Vulcalon wheels
    Speed: 12.5 Mph
    Weight: 100kg
    Height: 300mm to top of body, 600mm to the top of the disc
    Length: 1300mm
    Width: 600mm
    Weapon: 500mm Vert. flywheel @ 3000rpm. Has a 4.00 second spin up time due to the C40-500 Magmotor on 36v with a 2:1 twin tension cog belt reduction. The flywheel produces 31.5Kj€™s at maximum RPM but is lethal at around 1 second. The second weapon is also the srimech, this weapon is a low pressure pneumatic flipper running on 10Bar (145psi) running into a single 80mm bore ram. This produces 509kg at the ram and is then transferred into the flipper with a leverage point ratio of 1:1. This is a forward facing flipper like FireStorm and will have no problem toppling the heaviest of robots.
    Chassis: 4mm Grade 5 Titanium monocoque with extra 5mm Titanium ribs to give it more rigidity.
    Drive: 2 x S28-400 Magmotors @ 36v with a 10:1 Mod 2 spur gear reduction
    Batteries: 90 x 3000mAh NiCD cells producing 36v @ 9amp
    Color- the robot and skirts and flipper are blue and the disc is yellow
    Clearance- it has 0mm at the front due to the wedge it has 0mm at the sides due to skirts its 6mm with out it also has a 0mm at the rear due to the small wedge which is there to replace the problem of the skirt being flipped into the disc. The skirts are NOT hinged and held down by torsion-springs so they shouldn€™t spring up and the rear one shouldn€™t go up into the disc
    Notes- The flywheel is at the back off the robot it goes over the back of the wedge so if I can get a robot up the wedge far enough it will be hit by the disc. The skirts stop the robot landing on its side.
    Achievements- as disco, 3rd seed in ajwars and undethed challenge belt holder in ajwars extreme 1-4 ajwars 3 8th seed, as disco 4, semi finalist of the lord of the ring tourney, WINNER OF THE LORD OF THE RING TOURNEY

    NAME- The deer (was crusher chaos)
    SHAPE- Invertible box
    COLOR- the robot and claws are a dark green color
    WEIGHT- 100kg
    DIMENSIONS- 1m x 80cm x 25cm (l,w,h)
    SPEED- 15mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- It has 6mm at the front due to the claws and has 0mm at the sides and rear without skirts 6mm. The skirts also work both ways up.
    ARMOUR- 3.6mm hardox
    MOVEMENT- 4 inner wheels that make the robot invertible
    POWER- 2 x S28 Magmotors on 24v.
    WEAPONS- it has a front pair of horizontal hydraulic crushing claws set up like deers antlers like you fine in extreme destruction. The claws have 3.5 tones of crushing force on the front tips of the claws at the middle is 6tones and right at the back it has 8 tones of crush. The claws are powered by hydraulics through a 120mm bore rams at 3000psi
    NOTES- invertible, wide base means I wont topple while the deer is crushing
    STRENGTHS- Very powerful weapon
    WEAKNESSES- it could be turned into venison

    Name- Catus Catus 8.1
    SHAPE- It€™s shaped like a cat about to pounce
    COLOUR- black and white
    WEIGHT- 150kg (it€™s a shuffle bot)
    DIMENSIONS- 90cm X 78cm X 35cm
    SPEED- 18mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 0mm at the front due to jaws, 0mm at rear due to tail and it now has 0mm side ground clearance due to new side skirts
    ARMOUR- it has 3mm hardox
    MOVEMENT- moves on 8 inner camshafts
    POWER - 2 S28-400€™s on 24volts
    WEAPONS- It has a front pair of growler style crushers shaped like a cats head powered by a 80mm bore ram with 3000psi hydraulics, the rear weapon is a flipping tail powered by 80mm Bore ram on 1000psi pneumatics.
    NOTES- has curved sides to stop landing on side
    STRENGTHS- great weapons, self rights with ease
    WEAKNESSES- Limited co2

    Name- Take me out (thanks to Dave for naming the robot for me)
    SHAPE- Wedge
    COLOUR- Dark grey
    WEIGHT- 100kg
    DIMENSIONS- Height: 20cm, Length: 80cm, Width: 65cm
    SPEED- around 18mph
    TURNING CIRCLE- 0mm
    GROUND CLEARANCE- 0mm at the front due to wedge extender, 5mm at sides and rear
    ARMOUR- 4mm Aluminium Boron Carbite
    MOVEMENT- 4 inner vulcalon wheels, it uses a skid steer system like tornado
    DRIVE- 2 LEM 130€™S on 36 volts
    BATTERIES- custom 3300mAh NiCad Cell 36v BotPack
    WEAPONS- The robot has a 1000psi nitrogen flipper on a 80mm bore on a 100-stroke ram which should make around 3.5 tones at the ram (if I am incorrect please correct me) the nitrogen is stored in 2, 2.2kg canisters, the robot has around 25 flips in a fight, the flipper is on high pressure
    STRENGTHS- Powerful weapon, good drive
    WEAKNESSES- limited supply for the weapon

  3. #33

  4. #34

  5. #35

  6. #36

  7. #37
    swiss_tony
    Guest
    Jeez Rich, do you have some sort of grudge aginst me, always attacking me when you get the chance?

    Focus on take me out, Death Adder will be a bitch to attack so ill see if I can run while spinning fast enough to get away. My horrible control wont help though, so well see if I dont tear apart the arena first

  8. #38

  9. #39

  10. #40
    eerr....hit and run i think. mainly an axe job as flipper is going to be pointless, use it only if Im actually under them, dont go trying to get under.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •