Just to shut Danny up

Smash-Up At The Bar

Weight- 98.8kg (As ever, weight distribution available on request)
Dimensions- H- 35cm, L+W- 65cm
Speed- 9.6mph
Shape- Low Square Cuboid
Ground Clearance- 7mm chassis, dead zero everywhere else
Turning Circle- 0
Armour- 4mm RSP-707 TG top, 6mm Hardox on sides, 5mm polycarbonate base
Locomotion- 4 240mm foam filled wheels
Power- 4 x S28-150 Magmotors, producing 11.72BHp
Removable Link Position- Underneath rear skirt about 10cm back.
Weapon 2- On top of the machine is an 18kg spinning bar powered by a single LEM 130 off 48V. it spins at 2600rpm and produces a nasty 94Kj of energy, which we predict should be able to nicely cut through up to a cm of titanium. There are no 2x2kg hammer ends, angled down over the edge of the box, on the end, which should mean that we can now hit machines, even when they are lower than us. These means there are now no need for the skirts.
Srimech- Another incredible part of the machine. When we are flipped, the bar naturally slows down. When the speed reduces to a speed of around 60rpm, at which point such action will not damage the mechanism, 2 latches will automatically stop the blade from spinning. This will enable us to fire 2 low-pressure arms, each with around 14 fires before the pressure drops. This should be enough per fight
Strengths- Good all-round machine
Weaknesses- Can be beaten by a strong, fast, powerful flipper as well as a couple of single machines that shan€™t be named. Very little will beat this one as it is designed along the same line as Spinverter, in the sense that it€™s the best of everything in a small package.

Chassis- 10kg
Armour- 24kg
Batteries- 9kg
Motors- 6.8kg
Weapons- 28kg
Weapon Power- 12.2kg
Electronics- 7kg
TOTAL- 98.8KG


B2B (Back 2 Basics)

Weight- 100.6kg
Dimensions- L-75cm W-54cm H- 36.5cm
Speed- 8.5mph/ 3.8 m/s. This however still gives excellent acceleration and the speed of the hits will help us do the Tornado thing
Shape- Normal Wedge, with rollbars on the back panel made from welded 1cm titanium.
Locomotion- 2 x 270mm diameter wheels with custom cut treads from an old adapted Go-Kart
Ground Clearance- 0 at front, 0 underneath hinged skirts at sides, 4mm underneath skirts and at back.
Turning Circle-0
Power- 2 x 36V Dustin Motors running off 3 x 24V TMC batteries weighing a total of 9kg for the batteries plus 2.6kg for the motors (Lightweight or what). It gives a total (Presuming efficiency is at maximum) of 4.42BHp. Not the best shover, but with the wedge shaped, the idea will be that before pushing you scoop the wheels off the ground.
Armour- 7mm Titanium/Vanadium Alloy all around weighing a total of 28.4940747kg for the whole body. The titanium bars on the back weigh a total of about 8.4kg.
Chassis- The chassis is made of 1cm aluminium bars, and weighs around 12kg.
Weapon 1- The weapon is a Helium powered flipper, with 2 x 3kg helium rams, capable of firing about 40 times within the course of a fight, and despite running off just 400psi, is easily capable of flipping 250kg. The rams in total, plus gas, and bottles etc. weighs around 16kg and the actual flipper is made out of 4mm Titanium/Vanadium alloy and is around two-thirds the width of the body and goes up the whole wedge. It weighs 5.022kg.
Weapon 2- the bottom of the front wedge is an entirely detachable wedge made of 1cm aluminium. It€™s been designed to be heavy enough to prevent the front wheelying when driving, and therefore means that it should be simple to flip any robots over. It covers about 10cm of the wedge, and is more than capable of resisting attacks. It€™s been designed well and uses the force of gravity and balance to keep it down, whilst only weighing 3.288384kg in total.
Removable Link Position- In a hole with a swinging flap about 10cm into the back panel, but you have to get past the rollbars to get to it.
Srimech- The flipper acts as a self-righter, and will always land on his wheels thanks to the rollbars on the back, once we self-right. The only time this won€™t work is if we can€™t get enough pressure in the ram to fire us over.
Strengths- Powerful, long-lasting weaponry. Manouvreable. Flipper should never fail to slide underneath.
Weaknesses- Not the best pusher in a straight shoving battle


Powerpoint The Thrasher 5 (PTT5)

Weight- 91.2kg (WDOR)
Dimensions- L- 60cm, W- 90cm, H- 28cm
Speed- 16.7mph, 7.5m/s
Shape- resembles a spanner, with the tightening bits at the side.
Ground Clearance- Not too big, but not tiny either, probably around 4mm
Turning circle- Minimal, if not nil
Armour- 1cm Grade 5 titanium all over, weighing a total of 38.88156kg
Power- 12 x 2480mAh, Apogee Lithium Polymer batteries, running at 11.1V each, but run in series to crank it up to a limit of just 24V as this is all we need and they weigh a total of just 1.86kg. They power 2 PERM-PMG-080€™s running at 24V and weigh a total of 6.1818182kg and produce 7.9BHp. The motors are geared down at a ratio of 14:1
Locomotion- We€™re using wheels from off-road skateboards for the main powered central reasons, and then we have 8 wheels from normal skateboards mounted on all corners top and bottom for extra stability.
Removable Link- The removable link is in the centre of the top of the machine, directly above the weapon.
Weapon- In the centre of the spanner form, there is a 50cm diameter horizontal disc, running off 2 x LEM 130€™s running on a reduced gearing to just 2000RPM . This will produce just over 10Kj, but the numerous little teeth on the outside (about 250 of them) will constantly chew at the surface. The whole disc is made of 1cm titanium and weighs just 9.2kg.
Srimech- Invertible
Strengths- Invertible, Nippy, Hard To Get Hold Of
Weaknesses- Slightly tricky to drive, Weapon will not damage thick armour


Hacked off Ha-ka

Weight- 89.4kg- (WDOR)
Dimensions- H- 40cm, L- 1m, W- 70cm
Speed- 13.3mph or 5.3 m/s
Shape- 2 x 35 degree wedges about 40cm long, with a 3ocm box section in the middle.
Locomotion- 4x Solid aluminium hubs with old karting wets around it
Ground Clearance- 1mm at sides, 3mm at rear, 0 at front
Turning Circle- 0
Power- 4x Dustin motors running on 36V powered by 3 TMC 36V batteries/ They produce a total of 8.84BHp
Armour- 5mm Aluminium Boron Carbide
Weapon 1- A larger hammer than before weighing 11.5kg. It runs off some very nice 1000psi nitrogen rams, and produces around 4 tonnes at the beginning and about 2.7 towards the end. At the beginning I€™d say it€™d cut through 8mm titanium in 2 or 3 swift hits. It€™s double sided, with one Terrorhurtz style blade, and one Mortis one.
Weapon 2- A small strip of ti/vanadium alloy that should enable each wedge to slide under easier
Removable Link Position- Under a small 6mm steel electromagnetically secured panel at the back of the robot.
Srimech- invertible, but the axe will right it if necessary due to the fact that the head is angled back into a hole, which keeps the head inside the body.
Strengths- Powerful weaponry, Manouvreable, good acceleration, well armoured
Weaknesses- Not the best pushing power, limited CO2.


In-terror-fied

Weight- 97kg(WDOR)
Dimension- L- 95cm, W-70cm, H-32cm
Speed- 18.6mph or 8.3m/s
Shape- Box with sloped sides and a rounded back
Ground Clearance- 0mm everywhere but back where it€™s 8mm
Turning Circle- 0
Locomotion- 2 x 330mm diameter rubber tyres with custom designed treads. There is also a full-size invertible castor at the front to aid steering.
Removable Link position- At the back of the machine, under the armour and about 10cm back. This bit has a swinging flap.
Armour- 4mm Fibre Glass over 3mm Grade 5 titanium
Power- 2 x 15.1hp PERM motors running at 48V and powered by 36V NiCad packs.
Weapon- A pair of large clamping jaws ala Dundee, powered by a hydraulic ram and producing around 7 tonnes of force. In between them is a hydraulically powered crossbow that will hopefully puncture the shell on the sides as back as well as the top and base.
Srimech- Invertible
Strength- Powerful weaponry, Powerful drive, strong and lightweight armour.
Weaknesses- Poor traction, against well-armoured machines, weapon will be useless.


Veg 2

Weight- 100.2kg (WDOR)
Speed- 12.8mph 5.7 m/s
Dimension- H- 23cm W- 70cm L- 93cm
Shape- Low wedge, with extra steeper wedge part at back.
Locomotion- 2 x drilled aluminium boron carbide wheels, with custom cut tyres made from an old conveyer belt. These have miniature diamond shavings in to allow extra traction. They stick out at an angle out of the back wedge. However, they have wheel guards to protect them, which show nothing but the bit that hits the floor.
Ground clearance- 0 at front, 0-5mm at sides, 2mm at rear.
Turning circle- 0
Armour- 5mm Nanoflex, with wheel guards and flipper being made from 7mm
Power- 2 x S28-400 motors running at 24V producing 9BHp but only weighing 6.2 kg. We€™ve got 2x 24V TMC batteries powering them.
Removable link position- about half way down in the wedge at the back.
Weapon- A Helium powered flipper, with 4x 2kg canister running at 750 psi. This should have around 35 flips in it and should be able to toss robots about 3-4 feet into the air. It can be cranked up to 1000psi or cranked down to 500, changing the flips level by 10 each way, and upping/downing the flip height by about a foot.
Srimech- Invertible and capable of flipping ala Rick both ways up.
Strengths- Powerful weapon, invertible, good manouvreability
Weaknesses- Not quite sure yet, possibly low on traction with 2WD, but htose wheels are well gripped.


RPS XPN1

Weight- 96kg
Dimensions- H-30cm W-65cm L-90cm
Speed- 12mph
Shape- Mega-Morg Shape
Ground Clearance- 3mm all round
Turning Circle- Almost 0
Armour- 13mm Lithium Carbide
Locomotion- 4 air filled karting slicks, with great manouvreability but limited traction. This is used for quick getaways and approaches.
Power- 2 24v batteries from a ventilator, weighing in at only 3kg each. These power 2 LEM 130€™s running at 48V geared down at 2:1 with the motors running at 3600rpm. This gives us 8.8BHp
Failsafe position- Under a sliding panel at the rear.
Paint Scheme- Fluorescent yellows, pinks and oranges
Weapons- The reason we€™re using lightweight materials for armour, chassis, batteries and motors, is so we have a lot of weight left for weaponry.

Weapon 1- A static bucket scoop with screw sticking up from it, to aid in using it to push
Weapon 2- A Terrorhurtz style axe on top of the machine running off a 180mm bore ram. The axe runs from a 1.5kg CO2 canister, which is run to produce 1 tonne at the ram and about 2.5 tonnes at the tip. The axe will give us 10-20 blows a fight, and is capable of getting a dent in 6mm Grade 5 titanium. It will go straight through 3.5mm Grade 5 titanium
Weapon 3- A small scissor style mechanism, capable of lifting or crushing at a force of 3 tonnes either way.

These should work in unison to give us many necessary features.
Srimech- Axe and/or shape
Strong Against- Most things providing all weapons are working.
Weak Against- Strong Armoured rammers
Robot Compared to- Imagine a cross between Terrorhurtz, Invertebrat, X-Terminator and Drillzilla (Strength of the armour) and you€™re about there.
House robot most feared- Growler
Strengths- Good all-rounder
Weaknesses- Traction


Upper-Cut

Weight- 92kg
Dimensions- H- 45cm W- 65cm L- 80cm
Speed- 8mph
Shape- Reversed Beveled wedge
Ground Clearance- 1mm under wedge at back, 5mm under front
Turning Circle- 30cm
Armour- 7mm Lithium Carbide
Locomotion- 2 casters mounted in a hole, underneath the front and 2 small rubber wheels at the back
Power- 2 LEM 130€™s running at 36V and with a pushing power of just under 6BHp. These are powered by 3 12V EC21 batteries, weighing 7kg each.
Failsafe Position- About half way up the wedge, under a 4mm steel panel, 3€ x 3€ secured by an electromagnet
Paint Scheme- Yellow
Weapons- A 13€ diameter vertical disc with 4 blades on the outside. It spins upwards and weighs 14kg. It€™s powered by an Etek, running 4:3 at 3000rpm and produces 25Kj
Srimech- Invertible
Strong Against- Axes, Horizontal spinners
Weak against- Flippers, Crushers
Robot most compared to- Itself
House robot most feared- Killalot
Strengths- Powerful weaponry, invertible
Weaknesses- Slow, Hard to drive