Pussycat Tribute Tournament 5

[dinowarrior]

No, I mean that I wish hed stop making a mockery of his son (It was his son according to the RWM).

[steven_mcg]

Less chat, more stats.

Still need em from Martyn, Matty F, Andy, Aaron, Alex, Scott, Tom, Chris M, Frank (SHW) and Martijn.

[team_britespark]

Scott??? Stats Needed??? *faints in utter shock*

[dinowarrior]

Name;Little Big Bot
Weight;25 kilos
BS;Square Wedge (like Morticon or Alley Cat in RW game)
Speed;20mph
GC;2mm
Armour;6mm polycarbonate
Power;2x 750-watt Bosch electric motors
Wheels;4 inner
Weapons;Double headed axe, like Terrorhurtz, but smaller. The idea is to batter oppodents instead of destroying them.
Srimech;The axe rights the robot.
Inspiration;The name of a Simpsons episode, AND the name of a wildlife documentory about small cats, but NOT after the famous film.
Strengths;Weapon
Weaknessess;Difficult to control

Name;Tom
Weight;50 kilos
BS;Wedge with rounded back
Speed;12mph
GC;7.5mm at sides, but flipper front is 0mm
Armour;3mm titanium
Power;2x wheelchair motors
Wheels;2 inner
Weapons;A flipper, like Chaos 2, able to flip 5 times its own body weight
Srimech;The flipper rights the robot. Whiskers prevent side stranding and the rounded back prevents stranding THAT way.
Inspiration;Part of a clusterbot called Tom and Jerry (you can GUESS the inspiration), but now he is working solo.
Strengths;Flipper
Weaknessess;GC a little high.

If LBB is too heavy, shed 2mm of polycarbonate off.

[pcbore]

Ill have the superheavy done this weekend, I just havent had much chnace during the week.

[majinb]

ok, now thingsll get serious :P

Name - Back to Rock
Weight - 100 Kilogram
Speed - 29 km/h (18mph)
Dimensions - 90x75x30 cm
Ground Clearance - 0 at sides and front, 2 mm at the back
Power - 2x Etek motors, 48 volt, 30 BHp, 4 chunky batteries, geared 2:1
Movement - Four wheels, 20cm diameter
Weaponry
- A wedge at the front, at a 35 degrees angle to the floor
- A pair of side skirts out of 4mm titanium with a 2mm polycarbonate laminate
- A titanium flipping arm, back hinged, powered by a 1,1kg gas bottle at 160 PSI, can easily flip a 100 kg robot 50 cm into the air or self right my robot when needed.
Armour - 7mm Ti/V alloy Box section chassis, 12mm Ti/V alloy for the rest.
Shape - basically a box, with slightly sloped sides with skirts attached to them, and a sloped front to ram and get underneath opponents (to flip, duh).

Strengths - Powerfull armory, high ramming power, hard to get underneath
Weaknesses - No powerfull active weaponery

[razerdave]

a 2:1 reduction is far too fast. Youd have virtually no control. I know we are on the same team, so Id thought Id better tell you

[parassyte]

Wheel diameter acts as another reduction. RPM doesnt change, but km/h does. One should note though that with 20 cm wheels, his robot would actually be going 56.6 km/h, instead of 29. (Using Eteks at 3000 rpm as a reference, since Im too lazy to look it up to the tens digit).

[razerdave]

Proves my point. 59Km/H is far too fast to keep under control

[martyn]

Name- Panicking (previously panic 3 GTI 2)
SHAPE- Low invertible box
COLOUR- Yellow except for the lifting forks which are black
WEIGHT- 98kg
DIMENSIONS- 65cm x 60cm x 15cm (Length x Width x Height)
SPEED- 23mph
TURNING CIRCLE- 0 mm
GROUND CLEARANCE- 0 mm at front due to forks, 0 mm at sides and rear due to skirts 5 mm with out, the skirts are hinged so flop over when the robot is flipped
ARMOUR- 12mm polycarbonate
MOVEMENT- panic now uses 6 Vulcalon wheels to give extra pushing power
POWER- 2 x LEM130€™s on 36 volts
WEAPONS- on the front the robot has a pair of invertible lifting forks, the forks are like those on panic attack, the forks are powered by 2 linear actuators
STRENGTHS- Low ground clearance, reliable weapon
WEAKNESSES- previously lost to spinners
Record- 17-9