Register To Comment
Page 14 of 43 FirstFirst ... 4121314151624 ... LastLast
Results 131 to 140 of 425

Thread: Pussycat Tribute Tournament 5

  1. #131
    1) Isnt Big Nipper 100kgs as it is?
    2) Thanks for clearing that up, but I agree with Aaron, you still havent stated the PSI for the crusher for example, which leaves it very open.
    3) By this I meant is it possible to successfully lift an opponent and shake them without losing grip? With the ammount of vapourbots covered in Hardox or thick Titanium these days it would be hard to crush.
    4) OK, fair point, but we assume everything is carefully mounted in vapourbots.
    5) Thanks for clearing that up. But still, there would be quite a lot of pressure on the arm and crushers. Think about it, 100kgs swaying side to side.
    6) Sorry, I didnt put this how I intended. I was just pointing out that it was quite hard for me to pull the information out about the mechanisms because it was in a clump with other information.
    7) Ill leave Martyn to tell you what he has told me.
    Yes, Psyclonic is the same as all other FBSs. But the point is this design has already been proven, see below for more info.
    9) The Nose is actually an originally designed robot designed to get under FBSs and flip them without them comming in contact with the body. Somehow I managed to release its stats before someone copied my ideas, again, see below.
    10) My point is it seems you have copied Martyns idea for The Deer, and I also seem to remeber you copied my idea for The Deflesher last season. Unlike Psyclone, I didnt nick someones design before they had released it after hearing about it and then taking all the credit.
    11) I also agree with what Aaron has said about rammer speeds, check the most recent FP versions, they have all been slowed down.
    12) Apologies once again to Dan, Steve and the rest of you for causing trouble.

  2. #132

  3. #133
    Im working on a FBS called St Lucifer, stats should be up very soon

  4. #134

  5. #135

  6. #136

  7. #137
    Roo Cubed

    Weight- 97.8kg (Weight distribution available on request)
    Dimensions- H- 17.5cm D- 130cm
    Speed- 15mph in driving speed.
    Shape- Low wide cylinder. This time though, the ends go slightly into curved wedge mode by abut 2cm. At this point, the ring armour narrows down to about 4mm titanium.
    Ground Clearance- Around 5.5mm
    Turning Circle- 0
    Armour- 2mm titanium over 2mm Polypropylene over another layer of 2mm titanium.
    Locomotion- 4-x air filled tyres with expansive hole-filling mousse inserted in order to prevent puncturing.
    Power- 4 x S28-150 Magmotors running at 24V off 2 packs of 24v Nicads. This produces 12BHp as well as only weighing a total of 13kg.
    Removable Link- In the very centre of the machine. Positioned so few axes will have heads powerful nor long enough to reach it, whilst the shafts must be long and this will reduce their accuracy.
    Weapon- A 38kg, titanium ring around the outside of the machine with 8x 4-inch long steel teeth with a chamfered triangular design in order to maximize damage. It€™s powered by a LEM-170 geared down by 5:2 giving out an output speed of 1286.4rpm. With a reasonably high horse power motor spinning it, and a low yet deadly top speed, it should get up to speed in around 2.8 seconds and has an output of 159Kj. It€™s 1cm thick as well so should withstand a good battering.
    Srimech- Invertible
    Strong against- Everything really.
    Weak against- Very quick rammers, Me
    Robot Most Compared to- Gyrobot?
    House Robot Most Feared- Probably Growler
    Strengths- Destructive, Invertible, Nippy, Well Armoured
    Weaknesses- we€™ll add those as we find them out. The only one I can think of is that the armour may be vulnerable to axes. Has a tendenc yot be slightly unbalanced

  8. #138

  9. #139

  10. #140
    Powerpoint The Thrasher 5 (PTT5)

    Weight- 91.2kg (WDOR)
    Dimensions- L- 60cm, W- 90cm, H- 28cm
    Speed- 16.7mph, 7.5m/s
    Shape- resembles a spanner, with the tightening bits at the side.
    Ground Clearance- Not too big, but not tiny either, probably around 4mm
    Turning circle- Minimal, if not nil
    Armour- 1cm Grade 5 titanium all over, weighing a total of 38.88156kg
    Power- 12 x 2480mAh, Apogee Lithium Polymer batteries, running at 11.1V each, but run in series to crank it up to a limit of just 24V as this is all we need and they weigh a total of just 1.86kg. They power 2 PERM-PMG-080€™s running at 24V and weigh a total of 6.1818182kg and produce 7.9BHp. The motors are geared down at a ratio of 14:1
    Locomotion- We€™re using wheels from off-road skateboards for the main powered central reasons, and then we have 8 wheels from normal skateboards mounted on all corners top and bottom for extra stability.
    Removable Link- The removable link is in the centre of the top of the machine, directly above the weapon.
    Weapon- In the centre of the spanner form, there is a 50cm diameter horizontal disc, running off 2 x LEM 130€™s running on a reduced gearing to just 2000RPM . This will produce just over 10Kj, but the numerous little teeth on the outside (about 250 of them) will constantly chew at the surface. The whole disc is made of 1cm titanium and weighs just 9.2kg.
    Srimech- Invertible
    Strengths- Invertible, Nippy, Hard To Get Hold Of
    Weaknesses- Slightly tricky to drive, Weapon will not damage thick armour

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •