Register To Comment
Page 6 of 25 FirstFirst ... 4567816 ... LastLast
Results 51 to 60 of 241

Thread: Martyn's Robot Wars Series 5

  1. #51
    The Linear Mover

    Mass - I don€™t know(with any luck within 200 kg )
    Weapons - A 6-bar spinner (weighing 26 kg) (Bar sits on top) with the ends bent downwards to stop robots getting underneath. The bar is powered by a Lem 130 at 48 volts, and spins to about 3000 rpm. The bar has suspension on it, so it can hit hard objects without breaking
    Srimech - It has a large pole on the top to self-right
    Velocity - 02(TWO) mph!!!
    Ground clearance - At lowest, with the legs up, the base is on the ground, with the legs down it is 1cm.
    Skirts - Nah, the legs go up.
    Wheel Type - 8 legs with a linear actuator in the middle of the legs motion, so is the leg. When the actuator retracts, the leg goes forwards, and when the actuator is at the end of its movement, the leg is going backwards. It€™s a bit like a train (Ta for Mr Frank). There is a 2nd linear actuator on each leg to lift it up, mainly to allow the first actuator to go back without moving.
    Motors - No Thanks, I will pass on having drive motors this time
    Batteries - Enough to survive 6 minutes of fighting action.
    Body Shape - Cut-Off cone, with Ziggo style Srimech bar
    Armour - 4mm titanium cone, with steel inner section/base.
    Colour - The bar is red

    Summary - It€™s a walker designed with those anti-walkers in mind, if the system doesn€™t class as a proper walker, nothing will. Thanks to Frank for suggestions.
    Strengths - Weapon, 360 degree attack, Srimech, Most of weight is in base
    Weaknesses - Crap at turning, crap speed, not the best to drive.

  2. #52
    Ingore those stats please mr martyn:

    The Linear Mover

    Mass - I don€™t know (with any luck within 200 kg )

    Weapons - A spinning semi-shell (aka Typhoon), powered by a Lem 200 at 48 volts. The shell weighs in the region off 45 kg and takes ~ 2 seconds to spin up fully to 950 rpm, with the gearing from the motor. The shell has blades, 4 on the bottom level (1mm from base) and 4, 5cm up. The blades up a bit are longer so that it hits with 2 blades. The shell itself has rubber suspension to take

    Srimech - It has a large pole on the top to self-right; it€™s bent at the end

    Velocity - Two mph!!!

    Ground clearance - At lowest, with the legs up, the base is on the ground, with the legs down it is 1cm, but it changes when walking.

    Skirts - Nah, it€™s variable ground clearance, so skirts would get in the way.

    Wheel Type - 8 legs with a linear actuator in the middle of the legs motion, so is the leg. When the actuator retracts, the leg goes forwards, and when the actuator is at the end of its movement, the leg is going backwards. It€™s a bit like a train (Ta for Mr Frank). There is a 2nd linear actuator on each leg to lift it up, mainly to allow the first actuator to go back without moving the robot back. There is a back-up system in which the entire leg system can drop down to lift the base off the ground to move.

    Motors - No Thanks, I will pass on having drive motors this time

    Batteries - Enough to survive 6 minutes of fighting action.

    Body Shape - Cut-Off cone, with Ziggo style Srimech bar

    Armour -6mm titanium cone. Steel chassis, aluminium legs.

    Colour - The bar is red

    Summary - It€™s a walker designed with those anti-walkers in mind, if the system doesn€™t class as a proper walker, nothing will. Thanks to Frank for suggestions.
    Strengths - Weapon, 360 degree attack, Srimech, Most of weight is in base.
    Weaknesses - Crap at turning, crap speed, not the best to drive

    Yep, Im that bored.

  3. #53

  4. #54
    Guest
    Just get rid of your walkers. If you cant design a walker we dont have a problem with, doesnt it say something?

    Ill have a look at this new one.

  5. #55
    Build it and Ill believe it.

    The reason the UK vapourbots are dieing is because people like you, Dave, are constantly trying to pass off cannon fodder as entries.

    Damn I miss the days of SpinVerter 3, VGer and The Robot That Wasnt There.

  6. #56

  7. #57
    It is a true walker. According to the rules, Ill give you that, it looks almost the same as the Jim Struts/Miss Struts walking mech.

    The whole cam situation only applies to people mounting off centred wheels (CAMS) and calling them walkers. One of Christian Carlbergs robots was like this and was quickly banned.

  8. #58

  9. #59
    swiss_tony
    Guest
    %33.3 and a third, Frank.

  10. #60

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •