aka IDIOT, Automatic Schmuck, Typhoon 2.

Team Name: Team SpunOut
City/Town/Suburb Representing: the Eastern End of Morphett Crescent, Perth, Australia XD
Robot Name: a.k.a. I-D-I-O-T
Length/Width/Height: 800mm diameter, 265mm height at center 400mm, sloping down to 100mm at outer circumference.
Weight: maximum 100KG. Should realistically be a few under.
Motivation: 4 120mm diameter titanium custom-made omniwheels, 2mm rubber tyres on each omniwheel tread.
Speed: 3.34KM/H (2.0875MPH)
Weapon: Shell-spinner, powered by a single PERM motor at roughly 2:1 on a separate 36V supply. The shell weighs 28.2KG and has 4 1KG tool-steel €˜claws€™ on it at a height of 5cm from the bottom of the shell to still catch all the low bots without threatening the arena. It spins at a controlled 1700RPM.
Drive: 4 AstroFlight C90s on 24V, each geared down 30:1 to give 300RPM output.
Power: 4 24V 3Ah Battlepacks, 6 12V 3Ah Battlepacks giving 24V 12Ah for the drive and 36V 6Ah for the weapon.
Armour: It has a drilled titanium/vanadium 12cm x 2cm bar chassis in the cone shape, and the shell itself is made of 6mm Hardox with various reinforcements of 10mm Titanium/Vanadium.
Ground Clearance: 1cm
Turning Circle: 0. Obviously.
Notes: Rights itself via a pole in the middle of the flat top, which pokes out in four directions to right it on any side. Can travel in any direction at any time, and can outpush a lot of bots. Speed is no worry due to the shell-spinner firstly, and the huge torque secondly. I can comfortably push others when I run out of weapon power, and I have the batteries to very, very comfortably go the distance.

Name: Automatic Schmuck
Motivation: Wheeled (x 4, 120mm diameter main, 30mm €˜castor€™ front wheels)
Speed: 24.16KM/H (15.10 MPH)
Weight: 98.42kg
Height: 130mm at peak; variable from 28mm upwards.
Length: 870mm
Width: 743mm
Ground Clearance: 0 at sides w/ skirting, 0 at rear with €˜hinged€™ wedge, 0 at front with wedge; 12mm at the point nearest the back wheels otherwise, down to 5mm at the front wheels.
Weapon: 17.14kg kinetic-energy bar. 13.10kg, 111.2cm long bar, 2 2.02kg hardox weights (one at each end). It€™s powered by a C40-300 on a separate power supply at 24V, which when geared down 2.4:1 gives me a safe 1700RPM (spin-up = less than 0.5 seconds), and a heck of a lot of KE to transfer at the tips. The weapon system is held securely in place on steel box-section supports parallel to the wedged top of the robot, minimizing shock output to the rest of the robot.
Drive: 4 S28-300 3€ MagMotors, 2 on each rear wheel, on 24V. This gives me easily 10HP and a lot fo torque despite the healthy speed.
Batteries: 2 x 24V 3Ah Battlepacks (drive), 2 x 12V 3Ah Battlepacks (weapon). They are all shock-mounted, and slot together due to the unique curving on the outside of Battlepacks, allowing secure holding.
Chassis/Armour:
Chassis: 30 x 30 x 4mm Ti/V box section.
Armour: 13mm Ti/V all round. The skirting is 9mm Hardox plating, as they are all very small, and the two wedges are made from 6mm Hardox plating.
Electronics: Runs a RoboWars.org BMC speed controller with Hitec Focus SS-3 75mhz PCM 3ch Radio and a 3-axis computer Gyro for maxium control and handling. Uses 150amp rated Anderson power pole connectors and locking pins. Electronics are shock mounted and mounting in a floating style encased in HD (High Density) foam.
Notes: Spinning upside down, paired with the wedged style of the bot, allows a very quick & easy form of self-righting. Designed to knock the shit through some more superbots, for old times€™ sake.