Im looking for a fitting that will screw into my dry powder fire exting, with a tee peice on it, does anyone know where you can get such an item????
ta
billy
- FRA
- Forum
- Robots
- Events
- Media
- What's New?
All times are GMT. The time now is 21:20.
Im looking for a fitting that will screw into my dry powder fire exting, with a tee peice on it, does anyone know where you can get such an item????
ta
billy
Do you know the thread size?
I suspect its non standard and very fine.
Heres a possible size selection.
http://www.chinafireextinguisher.com/products/dry.htmhttp://www.chinafireextinguisher.com/products/dry.htm
hey, im looking for the pivot part that you can buy for the bottom of your cylinder, i think its called a clevis, i have the one for the top.
does anyone know where i can get these, i cant remember the bore size of my cylinder, i bought it from technobots about 1.5 years ago, and they said that it work ok, for a feather weight at 10bar, so im not sure of what size to buy, can any one help.....
Try Technobots ( Paul may be able to point you in the right direction )... or a supplier for the make of your cylinder.
What is the make?
(Message edited by woody on July 02, 2006)
It will probably have a code on the side of the cylinder in the form of a part number, quote that to the manufacturer and they will help you.
Or work it out urself?..I have an SMC branded ram with me at the momment, On the side it sais C92SB32-320 The end of the code tells me that its 32mm bore and 320mm stroke. Once you have the bore of the ram, ordering a clevis should be no problem.
thanks guys great help again!
Well, back on topic here!!! Im alive!
I have just been really busy with work and I moved into my new place, so new stuff got put on hold... Good news is that I have some free time every now and again so I am going to remake / finish high roller.
The high roller that I made the first time would have sucked, so I am going to start all over and make it better this time.
To start things off I got a new manifold. the cylinder will be in the middle like it should be. So now that I have that all done I am going to work with Bryan Rudy (The guy who made Ingor the FBS omni 12lb) on the CAD. Hopefully in the next few weeks we will have the CAD all done then the CNCn can start!
Look for the same-ish shape, but the frame will be alot different.
Same BaneBot units for drive and a big Li-p for power...
Any questions just ask! Also, here are a few pics of the new unit..
http://i79.photobucket.com/albums/j147/wazio/IMGP2398.jpghttp://i79.photobucket.com/albums/j1...o/IMGP2398.jpg
http://i79.photobucket.com/albums/j147/wazio/IMGP2397.jpghttp://i79.photobucket.com/albums/j1...o/IMGP2397.jpg
http://i79.photobucket.com/albums/j147/wazio/IMGP2396.jpghttp://i79.photobucket.com/albums/j1...o/IMGP2396.jpg
~Chad
I see you put your system all horizontal. How do you stop the setup from sucking in loads of liquid co2? Or are you using compressed air or something like that?
I will add an anti-syphon tube to help combat this problem. For the most part I will just have to live with it. One of the big differences between the FRA and RFL rules is in the use of pneu systems. I have to jump through hoops just to use the Mario cylinder. So with that being said I am going to use stock parts that have pressure certs so I dont have to worry about anything. I will just build around the large set up. Tiz not THAT bad, but I would like something that looks lot cleaner... Something like some of Marios new set ups. . .
~Chad
like mine.
Posting Permissions
Bookmarks