Pneumatic

[blazerbotics]

nearly everybody uses 600g bottles. weigh about a kilo empty.

[wazio]

I found this page.

http://www.whitewolfairsmithing.com/cci%20parts.htmhttp://www.whitewolfairsmithing.com/cci%20parts.htm

This looks to be just what I need! The 22oz tank is ALOT lighter than the 20oz regular paintball tank. I will just need to get an On/off Valve for it.

~Chad

[woody]

Ummm ....... What 22 oz tank?
I can see a 22 cubic inch tank ....... I think thats about 9 oz of Co2.
A 600g or 20oz tank is 50 cubic inches.... so the tank youve found is approx 1/2 the volume and therefore 1/2 the weight.

Woody

Link for weights and specs on various sizes.......their 20 oz cylinder is 1.5 lbs

http://www.catalinacylinders.com/http://www.catalinacylinders.com/

http://www.all4paintball.com/detail.asp?pid=84019

(Message edited by woody on October 11, 2005)

[wazio]

Cylinder on its way. Tanks are here, Valve is here.. All I really need to do is order my fittings and hose. What do you all usually use? And what size is the top of a paintball tank? I need to get a T for it and I am not sure what size. I am going to use a mix between .5 hose and 1/4 hose.. Comments, tips, suggestions, links.. all would be good! Thanks!

5/8-18UNF-2B Is a tank top size... Nevermind But still cant find good hose that will take the 3000PSI of a FP system. Anybody have some extra that they would box up and send to the US? No, not for free!

~Chad

3000 p.s.i. !!!

750 psi is around the normal pressure for co2.

Heres a source for your 1/4 tube and fittings .

http://www.newageindustries.com/nylon12.asphttp://www.newageindustries.com/nylon12.asp

OR

http://www.airsoldier.com/fittings/index.shtmlhttp://www.airsoldier.com/fittings/index.shtml

Id suggest that you try and pipe up the cylinder valve and tank in solid.

Heres a link to Paul Coppers site.. ( Technobots ).

The pics should give the general idea.

http://www.technobots.co.uk/M2XT/M2XT-Home/M2XT_Build/Custom_Ram/custom_ram.htmlhttp://www.technobots.co.uk/M2XT/M2XT-

Home/M2XT_Build/Custom_Ram/custom_ram.html



(Message edited by woody on October 17, 2005)

[wazio]

Anybody know where I can find a 1/2BSP (or whatever your standard thing is) to a 1/2 NPT fitting? Marios cylinder has that, which I cant seem to find. . .

Tap the ram 1/2 NPT .........our 1/2 BSP .825 - 14 tpi and is close to your 1/2 NPT.. .838 - 14 tpi

Adaptors here....http://mdmetric.com/prod/R631/MetricConversion-steel-pg1.htmhttp://mdmetric.com/prod/R631/Metric...-steel-pg1.htm