Randomness

[kodster]

I really need a good AVI to GIF converter...

[arson]

Relax.......I be a doctarr

[leorcc]

Yes,finally good news. Barack Obama is elected with a 10% lead.

[kodster]

Indeed. Times are changing, and for the better this time. :P

[RogueTwoRobots]

Came across this little critter on the Aussie forum:

http://au.youtube.com/watch?v=oUH3m6ZyW-g

[typhoon_driver]

this made me smile,

http://www.youtube.com/watch?v=4Xkw8ip43Vk

[stu]

Was on park today...
http://news.bbc.co.uk/1/hi/uk/7713643.stmhttp://news.bbc.co.uk/1/hi/uk/7713643.stm

And im on one of the trains.. and herd mates voice in it as we was standing behind Russell B during interview, we had big group picture with him. Meh, not geeks was just a fun free day to be fair. Im sure alot of you have been on Corkscrew.. 2010 looks to be a great worlds first by sounds of it.

Mr Stu

[flippt]

Just a random thing:
http://robowolf.deviantart.com/http://robowolf.deviantart.com/

Check out my gallery and post a comment either here or on the website!

[geoff]

The following post was taken from the RFL forum. I thought all you pneumatics guys would appreciate this one....




I was doing research for a non bots pneumatic project and came across this post on a 2007 spudgun forum. It show how clueless folks can be. I wonder if he lived to tell the tale?

How is the thread 5/8in when a 3/8in pipe would not fit?

My c02 tank had a 3/8in thread but it was not npt threaded so I had to improvise.

So I took a dremel and sanded the threads off, then I got a 3/8 to 1/4in bushing wrapped it in teflon and put some 60 second epoxy on it. Then I twisted it into the tank with a pipe wrench. It was extremely hard to get in there but I got it all the way in after a lot of effort and then the epoxy set which made it rock solid. I then put more epoxy around the bushing and the tank for added safety. It should hold up to 250psi with no problems or leaks, the epoxy I used is rated for 1250 psi plus I screwed the fitting into the metal.

Pete

[stu]

Just for you Shane, since you gave me that message on MSN. lol.
Can you spot Mr Stu?
http://www.altontowers.com/pages/Corkscrewclosedhttp://www.altontowers.com/pages/Corkscrewclosed

Mr Stu