Name: Generator
Motivation: 4WD with Titanium encased Omni-drive.
Shape: *look at the CAD Render!*
Speed: 15MPH
Weight: 100kg
Height: 0 - 300mm
Length: 750mm
Width: 820mm
Weapon: The weapon is a highly kinetic empowered hammer. The 8kg Hammer with Stainless centre punch is powered by a 12kg 4000rpm flywheel which produces in excess of 45Kilojoules of energy. The flywheel has two planetary gearboxes mounted to it via a clutch and shaft. One gearbox is for firing the hammer down and a second is used for returning it to firing position. The first gearbox for firing is geared 6:1 from the flywheel giving it large speeds and torque on the hammering stroke, while the reverse gearbox is gears 20:1 to give a more controlled return and will help selfrighting.

The hammer should generate close to 43 kilojoules on impact. Or an equivalent to 3.9 tonnes of pressure in a single point. It should be able to dint Hardox armour, punch holes through Titanium and will destroy Aluminium like paper. Advice: Stay out from under the hammer!

The second weapon is the front wedge, it is a similar design to the wedge on Razer, it uses a sprung tensioned tip that will absorb low blows from spinners. The sprung front wedge is also actuated for a 200kg linear actuator which will allow Generator to lift it€™s front wheels up the ground to put more weight on the wedge to enable it to get under the opponents and their skirting. Once the opponent is up the wedge, we can grapple them with the hammer.

Chassis/Armour: 3.25 Hardox 450 with 10mm Titanium Inner bulkheads and panel bracing. This makes a near-perfect armour as the Hardox skin will survived the largest of spinner impacts while the lightweight Titanium supports and bracing sill stop the panels from bending or buckling and will keep all the internals safe.
Drive: 4 x S28-400 Magmotors on 24v, giving it a combined 16HP drive. The wheels are 150mm Omni-wheels. The robot has the ability to travel sideways and continue travelling forward at the same time, making it the hardest robot to defend against besides a translational spinner. The omni-wheel are generally a weakness to a robot, but these have been made out of 15mm Titanium and use Stainless Steel rollers with a thin coating of urethane tread.
Batteries: a simple supply of 5 x 24v 3600mAh NiCD Battle Packs giving a good 24v @ 18amps/hour.
Notes: Writer of fan fic, please contact me before writing the battles so I can email you a 1mb video of how the omni drive works. This way there will be no misunder standings of how the drive system works.

PWNAGE.