PLEASE! help me think up some
flipper designs using a servo
thanks
PLEASE! help me think up some
flipper designs using a servo
thanks
u can make a lifter with a servo not a flipper
be more specific please
http://www.teambeligerant.cjb.netwww.teambeligerant.cjb.net - go to useful technical information, then click on Flippers. Hopefully this will be of some help.
thanks,
I appreciate your help Gary
Jono
Actually you can make a flipper from a servo. I have never finised a complete Ant but I did have the flipper mechanism working. Basically the servo acted like a lifter but the arm was sprung loaded and was held in place by a catch. The servo would try to lift the arm which bent the spring against the catch until the pressure finally overcame the catch and the arm shot up. It actually started as an axe which worked well on the bench but when put into an Ant chassis the ant performed a back flip every time the axe was fired.
Is there anyone who has seen the Swedish robot EntrAnt?
yep seen it fought it and beat it, but its a damn good robot quick with a superb flipper
yeh thats got a superb servo flipper
heard lots about that
could someone please enlighten me a bit more about Entrant as ive never heard of this bot
Thankyou
Craig, that was the old EntrAnt and it was nothing like the new improve one.
Jono, they have a website, but thats mostly in Swedish.
http://www.bovik.homeip.net/robot/default.htmhttp://www.bovik.homeip.net/robot/default.htm
Bookmarks