3.1.1 i) All robots must be fitted with on-off switches/or removable links that operate both radio receiver and drive/weapon circuits - in practice totally removing all power from the robot.
ii) If there is more than one isolating device, these must be positioned adjacent to one another.
iii) The main power cutoff MUST be a removable link (See Technical Sheet No. 4.) which must NOT be in place unless the robot is in the arena or under the supervision of a technician. A key or switch is not allowed.
iv) The link must be positioned in a visible part of the robot€™s bodywork, fitted away from any operating weaponry or drive, and this position must be clearly marked.
v) The link may be fitted under a cover, but the cover and link must be able to be removed by a simple pull action.
A rope or cord loop must be fitted to the outside of the link cover. Pulling on this loop must cleanly remove the cover and link.
The cover, if fitted, must be painted red and contrast well with the surrounding bodywork panels.





Bookmarks