I€™ve skimmed through the 300 odd posts so please forgive me if a full and workable answer has been given, (in this thread or another), but the way this thread has gone off topic, please bare with me.

LED to show robot is powered. I think is good idea, easy to fit and has been covered. This is NOT what I€™m asking about.

It€™s the Failsafe LED. Rule 4.3

Quote; Feb 2 2004 from Sam, FRA safety executive.

€œThe failsafe light is due for a rewrite in the rules and is being moved to advisory status both because of technical difficulties in fitting for some and for the reasons of confusion that many of you have discussed above, it is currently not being enforced by any FRA events.€

The New rules are out and from what I can see this has NOT been moved to advisory.

I€™ve got my Power/Link LED, but wasn€™t going to bother with the failsafe LED, if it was to stay advisory only, mainly due to the fact I€™m not sure how I would go about fitting it!

Should it still have been moved to advisory but was over looked in the rewrite, or has it now become fully required?

Guy.