Sam, this requirement for the robot to place your robot in failsafe status when the Rx is off is a departure form the Mentorn rules. This will in effect mean that 4QD DCI boards and some PCM only systems no longer meet the FRA rules.

Where a code-based system is utilised, if this is not set up to return to neutral on loss of power.. The PCM system cannot output a neutral signal (say 1.5mS) because it has lost its power. This means there has to be a further level of failsafe required. Speedos such as Vantecs and Roboteqs are fine because they have their own built in failsafe logic but that is not the case for all. The same consideration has to be applied to weapons channels as well.

If I understand the above correctly, even those bots with BECs require this switch. It may help if you could explain the safety implications behind this new rule and does this switch have to be accessible without the use of tools?

Paul