Full Pressure Cutlet

[storm]

Will work fine for a valve, but youre risking having the contacts in the microswitch weld themselves shut if you try to use it for the compressor motor which at stall will draw far more than 10-15 amps.

What you want is something like one of these http://www.technobots.co.uk/en-gb/dept_31.htmlhttp://www.technobots.co.uk/en-gb/dept_31.html that your microswitch can operate. £1.95 from Technobots !

Ed
http://www.stormrobot.comhttp://www.stormrobot.com

[blazerbotics]

ours weighs 960g empty cant remember what the size is. about a foot long.

[fwsorg]

Cant see that being a problem at all.

14.4V will work just fine.

12V isnt exactly 12V either.

[Mouldy]

Mario has some 1/4 and some 1/8 5/2 valves. might be worth looking into?...i assume it was you talking to me on msn about borrowning a valve the other day- if so talk to mario because i blew my only spair a couple of months back...and as for the r/c switches on the compressor why not just atatch the compressor to your main link and pressure switch? that way you dont have to think about it when driving your machine.