Register To Comment
Page 1 of 6 123 ... LastLast
Results 1 to 10 of 52

Thread: Middleweight database

  1. #1
    Guest
    i will start the database off

    Name: BEAM
    Weight:Around 50kgs
    Motors:2x electrocraft high torque motors
    Contollers: 2x 4qd ncc 70a 24v speed contollers
    Batteries:2x 12v 6.5ah batteries (probeley changing to higher)
    Armour:6mm mild steel
    Weapons: ramming spikes ( probeley changing to pheumatic flipper)
    Extra notes: invertable + 4wd

  2. #2
    blazerbotics's Avatar
    Roboteer

    Status
    Offline
    Robots
    Apollo, Merlin, MONTE, Ratchet, BattleAxe and Goliath
    Location
    Leicester UK
    Posts
    2,056
    remember theres the official FRA DB on the middlewieghts website.

    Blazer
    50ish
    2x 400w Wheelchair motors (modified)
    No controllers at mo
    24v 6Ah NiCads
    2-5mm steel
    Pneumatic flipper

  3. #3
    typhoon_driver's Avatar
    Member

    Status
    Offline
    Name
    Gary Cairns
    Robots
    Hornet 2 - retired Boner - retired Smidsy - Sold 540 - Sold PP3D - Active
    Location
    Aberdeenshire
    Posts
    4,483
    name - Typhoon
    weight - near 50kg
    motors - 2x1hp wheelchair motors
    controllers - custom made
    batteries - 21V (cant remember Ah off top of head) ni-cads
    armour - 10mm thick steel and 2mm thick Al
    weapon - full bodied spinner
    extra - half the mass of the robot is in the disc and we have a 3hp mag powering the disc

  4. #4
    craig_anto's Avatar
    Member

    Status
    Offline
    Name
    Craig Danby
    Robots
    lets face it you just know me for Foxic
    Location
    North Carolina
    Posts
    1,209
    name- Tanto Jnr
    weight- 42kg
    motors- Mags
    Controllers- Tanto controllers
    batteries 24 or 36v Nicad
    Armour 1/4 T6
    weapon- none
    top speed of near 30 mph

  5. #5
    Steel Sandwich
    Wt 50 kgs
    Motors: Parvalux
    Controllers electronize
    batteries: 36 volt NiCad
    Construction: 4 mm mild steel throughout
    Weapon Electric lifter

  6. #6
    Guest
    name- Phoenix (Malc 1.5+)
    weight- 45kg
    motors- EV warriors
    Controllers- NCC 70
    batteries 24V Lead acid
    Armour 8mm Ally checker plate
    weapon- Electric Lifter
    top speed of near 30 mph

  7. #7
    team_ireland
    Guest
    John can electrolise take 36v?

    Regards
    Ian mc DOnald

  8. #8
    typhoon_driver's Avatar
    Member

    Status
    Offline
    Name
    Gary Cairns
    Robots
    Hornet 2 - retired Boner - retired Smidsy - Sold 540 - Sold PP3D - Active
    Location
    Aberdeenshire
    Posts
    4,483
    typo above.......its actually ni-mh

  9. #9
    Ian,

    I posted a reply to you but it dont see it above. The Electronize controllers cannot take 36 volts as supplied but they can be modified by removing or replacing the few components that cant take this voltage. Of course you need to use the external relays version.

    John

  10. #10
    Guest
    probely going to 12mm polycarbonate for alot of impact resisants

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •