no wonder his hawkers were going flat after each fight down in portsmouth !!! :sad:
no wonder his hawkers were going flat after each fight down in portsmouth !!! :sad:
there may be trouble aheeeeeeeaaaaaaddddd. but while theres sunshine and music and laughter and romance......lets face the music and dance.
will be using 4 bot packs at notts and jason will be using 4 13ah hawkers so which ever turns out the better we will see. and yes the title of the oracle is between woody and john reid.
jeeez u guys use a lot of power...
Gravity 3 could easily fight 2 full battles with only 3 9Ah 12V pbq batteries... 20 to 1 on 10 go cart wheels.
Was this due to excellent regen braking in the speedcontrollers ?
John has a far better understanding of the math involved in Robot building than Ill ever have!
Heres your specs W.J.
Same C40 motors ... @ 24v
Torque (per motor) to spin wheels 396 oz-in
Amps (per motor) to spin wheels 49.192 Amps
Theoretical Top Speed 5.9940 MPH
Total Peak Amps 98.385 Amps
Amp Hours Required - 3 Min 3.4434 AH
Amp Hours Required - 5 Min 5.7391 AH
@ 36v
Torque (per motor) to spin wheels 396 oz-in
Amps (per motor) to spin wheels 49.192 Amps
Theoretical Top Speed 8.9910 MPH
Total Peak Amps 98.385 Amps
Amp Hours Required - 3 Min 3.4434 AH
Amp Hours Required - 5 Min 5.7391 AH
(Message edited by woody on October 25, 2007)
gravity didnt speed for the weapon to work at its best. i need speed for envy to work at its best. notts will tell the tale.
Woody, C40 motor = Bosch 750 24V ?
And indeed Shane, just a little tip of the flipper, about 1 inch was enough for flipping action...
where can I find some more info on Envy by the way![]()
i dont have a web site but you can mail me with lots of questions and i will be more than willing to answer them.
Close W.J.
Higher stall Amperage with the C40.
C40
Torque Constant oz-in/amp 8.06
Stall Amperage: 480
Voltage Constant: RPM/volt 167.9
Operating Voltage: 24v
Bosch 750
Torque Constant oz-in/amp 8.7
Stall Amperage:270
Voltage Constant: RPM/volt 167
Operating Voltage: volts 24v
Go figure .
![]()
http://www.architeuthis-dux.org/torquecalc.asphttp://www.architeuthis-dux.org/torquecalc.asp
You didnt think I came up with the figures myself!
Bookmarks