Just finished rebuilding DragonStrike Dragon 2 and Tiamat. DragonStrike is the spinner the only diference is that the top and bottom is now 3cm thick high impact plastic instead of 6mm Ali. Dragon 2 is now 4wd with 18v drill motors. The bottom is 4mm Ali the top is 4mm polycarb and 1.2mm Ti. The sides and rear are 2cm Nylon the front is 2cm Nylon and 1cm Ti. Tiamat is a full pressure Flipper (courtesy of Mario). The side armour is 2cm Nylon the rear is Polypro.
Pics on profile.
Tony