Hey if Zeros going to Sheffield it can meet up with Conundrum Mk1. Zero looks like a good base to start with, wish i could have built mine as good as Zero.
Chris - http://www.featherweights.org/forum
Robot name: Little Hitter
Power: 1x NimH pack 33.6volts +600g C02
Drive: 2x 30v Drills motors 75mm dia wheels
Controller: 1 Technobots h bridge dual channel.
Weapon: Pneumatic axe. 80mm bore 50 stroke 16 bar ram(mounted vertically), paintball reg and buffer tank. 12mm pipes + 1/2BSP valve(3/2).Axe Shaft+head grade 5 ti.
Armour: 1.5 mm front, 1.2mm sides, 0.6-1.6 back all grade 5+ ti.
Chassis: 30mm nylon milled to 8mm in middle.
Weight: 12KG
Status: Finished. Going to sheffield.
Pic on profile
Robot name: Little Flipper
Power: 1x NimH pack 19.2 volts +600g C02
Drive: 2x 12v Drills motors 75mm dia wheels
Controller: 1 Technobots h bridge dual channel.
Weapon: Full pressure flipper. 50mm dia 60mm stroke hydraulic ram.1/2inch Burket,enough pipework for buffer/area of ram.
Armour: 1mm - 1.5mm all round,1.5mm where electrics are. 3mm flipper. All grade 5+ ti.
Chassis: 12mm Nylon + 0.6mm ti.
Weight: 11.9 KG
Status: Finished. Going to sheffield.
Pic on profile
nice
2 new feathers building. (1) Noname. 18v drill motors for drive. linier actuator with a 400kg pull/push for lifter. 2 x 12v 3000 nicads 2mm stainless steel and 4.5mm polypro armour. Will be at Magna.
(2) Ram bot with wedge Gold motors 6-1 reduction chain drive. 2 x 12v 3000 nicads. polypro and steel armour.
Im just starting the build of my new robot a push bot feather weight this time. See pic on profile.
Robot Name: Dont know yet havent decided. Maybe Mini Mayhem?
Power: 24V 3Ah NiCads
Drive: 2 drill motors powering 4 80mm dia wheels
Steering: Traditional skid steer
Armour: 3-5mm thk steel
Status: Design complete just starting build.
Richard
Team Mayhem
Oh forgot
Speed controller: IBC
Features: Drive train suspended from body to allow adjustment of scoop height & protect from distrotion in chasis.
Richard
Team Mayhem
pics look very good
Flipper
Current Version
Speed: 14Kph
Power: 1x 14v 3000mAh soldered NiMH Pack
Drive: 2x 9.6v Drill Motors
Controller: 2 x 30amp Electronize with external Relays
Weapon: High flow rate low pressure 10bar Pneumatic Flipper
Armour: 6&10mm Polycarbonate
Frequency: 40.685MHz
Status: Complete, Pic on Profile
Flipper
Upgraded Version (Parts are here but are not in the robot yet)
Speed: 18Kph
Power: 1x 16.8v 3300mAh soldered NiMH Pack
Drive: 2x 12v Drill Motors
Controller: 2 x 30amp Electronize with External Relays
Weapon: High flow rate low pressure 10bar Pneumatic Flipper
Armour: 6&10mm Polycarbonate
Frequency: 40.685MHz
Notes: Should drive in a Straight Line!
Status: Needs to be assembeled.
Latest pics of noname on profile
Posting Permissions
Reply With Quote
Bookmarks