I’ve got the FlySky fs-i6x transmitter, and the recieve it comes with.

channels 1 and 2 are the right and left hand motors, yet they seem to behave haphazardly,

sometimes they work, I move the right gimbal forward, and both wheels rotate forwards. sometimes I’ll move the right gimbal forward and only the left wheel will go forwards, and the right remains stationary, if I release the gimbal and try again, they both move correctly, it seems like it doesn’t always take instructions first time around.

im sure there’s something I’m miss understanding, or it might be the cheapest esc I’m using, (these https://www.amazon.co.uk/dp/B074VY2S...ing=UTF8&psc=1)

ive put a resistor between the two contacts on each motor too.


one other thing driving my crazy, is that the right gimbal whilst moving forward, for some reason it effects channel three (which is connected to a servo for a lifter) meaning when I drive forward, the lifter begins to lift