Register To Comment
Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: First beetleweight robot

  1. #1
    Hello there,
    This is our first post on the site so wanted to say hello. Have been following some of the threads here with interest and have picked up lots of great information. After going to see an extreme robots show my son and I decided it would be fun to have a go at building our own robot and so have designed and built a beetleweight as a project together. We've signed up for the battle in the 'burgh event in a few weeks time and are really looking forward to trying it out! We've done our best to abide by the necessary rules including a removable link fuse and light but I thought it would be worth posting a couple of pictures here and asking some of you kind folks if you would be kind enough to have a look and see if you can spot anything obvious that we might have missed or might cause us problems passing a tech check, given that we are completely green behind the ears. It would be disappointing to make the trip only to find out we can't take part for any reason. As you can probably tell, it was a bit of a struggle to get it down to 1.5kg! We can run it with a lifting blade on a 2s lipo or with some jaws which are a bit lighter on a 3s lipo. Not expecting great things for a first time out but at least hoping to get off the starting blocks! I'm a bit concerned about the link. We went for a removable fuse to save weight and a first it was a very tight fit but is loosening with use. Would it be allowable to put a velcro strap over it, still removable by hand? Incidentally we live in the north east. My son is 10 and I wish I still was! Many thanks indeed,
    Attached Images Attached Images

  2. #2

  3. #3
    Welcome! That looks like a really solid effort for a first go, you should be pleased!
    I've seen fuses being used as links in smaller classes but someone with a bit more experience may be able to set me straight as to whether if its ok in a beetle.

  4. #4
    Hi David

    Firstly, I don't see using velcro to hold the link in place being an issue, however if a tech checker hypothetically did take issue with it then you would be allowed to simply remove the velcro & carry on. One good thing about tech checkers is even if something does fail they will allow you to change it on the day so you still get to fight, plus there will be plenty of other roboteers around to help & give advice.

    To be honest though, as long as your fuse is rated lower than the max current discharge for each battery setup I'm sure you'll be fine. It looks like a good bot, I honestly wouldn't have believed it was a 1st attempt.
    James
    Team Phyte

  5. #5

  6. #6

  7. #7

  8. #8
    Ocracoke's Avatar
    Team Kaizen

    Welcome to the forum! Nice looking bot.

    Fuses as links is OK, I've seen this in the Featherweight class. 3mm aluminium will stand up to most things in a BW arena, better than mine did :P
    Team Kaizen - Build Diary for all the robots

    AW: Amai, Ikari, Lafiel, Osu, Ramu
    BW: Shu!, The Honey Badger
    FW: Azriel
    MW: Jibril, Kaizen

  9. #9
    Looks great! Congrats on your first build and hope it does well in Edinburgh.

    I think it's been covered pretty well already, but I've also seen both fuses as links and velcro covers. The key thing for the link is that it has to be safely accessed and removed by hand, so you're fine on both counts. Just make sure the people running the event know where it is and how to get at it.

    One thing I would say about the link... that cable tie doesn't look very secure! If it gets hit by something relatively minor the whole thing may come loose inside, which might then rattle the fuse loose. I guess that might also be a tech issue, since if losing the cable tie would allow the link and holder to fall inside the machine, it could then not be removed, i.e., it would no longer be a functional removable link. So might be an idea to either cover up the cable tie with a plate on the outside, or better have the fuse holder secured inside with something a bit more robust.

    I think coming in only-just-overweight is a great achievement. You've obviously planned everything out carefully! I'd say the reason you're on the limit here is you've started with a high mass drive system, 4 motors and big chunky wheels. There's not much left once you've built a box around that.

  10. #10

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •