Team Kaizen Build Diary

[team death]

Hi Lucy
If I might make a suggestion...the biggest obstacle is going to be the head of the bolt, it

looks like you would need at least 5 mm of clearance coming in from that side and you

are already at a squewiff angle by the looks of things.

If you come in from the other side with your shaft you could be Ok if you just slice a 10 mm

piece of that front mounting to accommodate the nut.

Ideally of course, that shaft would go from one side of the HDPE right through to the

other for strength but unless you cut a groove in the motor mountings or change the

main pinion you cant do it.