Jibril
Despite the rain, I did manage to get a test drive done at a friends house. The drive is OK but once again, the Scythe failed. It fired but didn't complete a full rotation.

I couldn't quite figure out where the issue was but myself and a friend spent a few hours securing and tightening down the mounting blocks and realigning the gear. The Scythe has also been moved back a little which should allow the shaft to clear the gearbox properly and I've refitted the front forks. I made up a wedge plate for the forks to be attached to so it should help deflecting spinners and such. With any luck, it might not embarrass itself at the Championships. :P