Register To Comment
Results 1 to 3 of 3

Thread: Lemon RX Wiring

  1. #1
    James Williams's Avatar
    Roboteer

    Status
    Offline
    Name
    James Williams
    Robots
    Neophyte, Meteorite & Exabyte (FW)
    Location
    Birmingham
    Posts
    90
    Does anybody know which way to wire a Lemon RX? The way I have it in the image the black wire is the 0V connecting into the inside connector and the white wire is the signal connecting to the outside connector, but I have a feeling it should be the other way round.

    o1PCVDB-.jpg large.jpg

  2. #2
    Redirect Left's Avatar
    Roboteer

    Status
    Offline
    Name
    Adam
    Robots
    Hyperion (BW) Modus Operandi (BW) Dead Meme (FW - WIP)
    Location
    Wakefield, West Yorkshire
    Posts
    177
    Hi, I use LemonRXs in BWs. The black wire (negative, or ground) is the bottom pin, positive is centre, which leaves signal (white) as top pin. On that picture, power goes to top The rest are channels except the far which is bind.
    Last edited by Redirect Left; 7th October 2018 at 17:28.

  3. #3
    James Williams's Avatar
    Roboteer

    Status
    Offline
    Name
    James Williams
    Robots
    Neophyte, Meteorite & Exabyte (FW)
    Location
    Birmingham
    Posts
    90
    Thanks for clarifying Adam.

Register To Comment

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •