Register To Comment
Results 1 to 5 of 5

Thread: Removable interlink

  1. #1

  2. #2

    Firstly i assume you mean the removable link? - if so, then my answers below. Remembering in most cases a removable link is simply a connector with a loop of wire.

    1a) Yes, many robots feature seperate links for weapons and drive for example.
    1b) No, however its best practice to keep them located in the same area.
    2) Yes, so long as the links are accessible without tools.
    3) Ive never seen a connector you insert by twisting outside christmas lights, but theres no tools required i suppose and should be fine.
    4) Yes, and this is sometimes required for invertible robots.
    5) It needs to be a physical circuit breaker. The robot should not be powered in any way upon removing.
    Last edited by Garfie489; 19th June 2018 at 10:43.
    My 3 loves - Rugby, Racing, and Robotics.

  3. #3
    A screw in link was the design used in the middleweight and lower typhoon bots (had a fancy high end 1000A connector for Typhoon 2).

    A circuit breaker would almost certainly fail a tech check.

  4. #4
    a visual aid might help.

    This is my old wiring loom from my feather, the battery connector is a xt60 and the removable link is a xt90.

    this is the style of removable link that 90% of roboteers use.


  5. #5
    Quote Originally Posted by typhoon_driver View Post

    A circuit breaker would almost certainly fail a tech check.
    Sorry thats my poor wording there.

    I didnt mean a circuit breaker as in the electrical switches used for overcurrent, i meant to actually physically break the circuit when the link is removed so nothing can flow. Effectively no circuit can be complete without inserting the link
    My 3 loves - Rugby, Racing, and Robotics.

Register To Comment

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts