Apologies, been a while since i updated this thread. Went for the Ender 2 and it was delivered just before Christmas. Build process was quite easy. It comes as a kit but most of the parts are already assembled so it's just a case of putting it all together. Then I discovered the first of my mistakes. The printer came with an EU plug. I contacted the seller asking why this was and they replied that they only ship UK plugs from China and not Germany where I ordered it from. So I had to wait a few days for an adaptor and I also bought filament. Once I turned it on I levelled the bed and started my first print. First few times the PLA didn't stick to the bed, so I had to stop it and pull what had built up around the nozzle. Kept re-levelling the bed and eventually got it to stick. But as it built up the nozzle started to grind on what it had printed. Stopped it again, cleaned it and started the print again. Now the print starts with a blob of hot plastic and that interferes with the print. I also now find that some of the rollers on the y-axis are misaligned so I need to take that apart. I then also decide to get a new, smaller nozzle and clean out the whole system while fixing the rollers. I've still to do this but have all the parts here and have also started designing my antweight as well. So there's an update on how it's been going, not as smooth as I hoped but no one said this was going to be easy.