turnigy 22260 3000kv 650v and hobbyking 60a sbec
turnigy 22260 3000kv 650v and hobbyking 60a sbec
Sure it is the motor beeping? More likely to be the ESC (not clued up on this Brushless tech yet so could very well be wrong :P). The ESC manual suggests that there is no throttle signal being received (1 beep followed by a pause).
Last edited by Ocracoke; 9th January 2018 at 14:32.
Team Kaizen - Build Diary for all the robots
AW: Amai, Ikari, Lafiel, Osu, Ramu
BW: Shu!, The Honey Badger
FW: Azriel
MW: Jibril, Kaizen
you sir, are a genius. didn't know there was a manual, just found it. Lemme have a look as its not that type of beeping, its a really quick one
its something to do with the throttle not being in the lowest position, will try to find the correct channel and mix. Problem solving people!
Last edited by Albear; 9th January 2018 at 15:08.
From the manual, looks to be that you need to reset the throttle position and set the pull rod to the lowest position.
Team Kaizen - Build Diary for all the robots
AW: Amai, Ikari, Lafiel, Osu, Ramu
BW: Shu!, The Honey Badger
FW: Azriel
MW: Jibril, Kaizen
Is 60a the recommendation for those motor's? I've found Afro ESC's are pretty bomb proof but they only go up to 30a but with the rounds only being 2 minute's, heat might not be to much of an issue.
Nah, its a bit of a long story. Ive got a pair of 30a also and there absolutely fine. Ive heard good things about afro's so lemme know how you get on!
I use the 12a for my drive I only have 30a for my weapon motor which in the last even run between 70-100% during fights. You'll see for yourself come the 10th no need to let you know
sounds good/threatening hahaYou'll see for yourself come the 10th no need to let you know
Lol this is only going to be my second event and to be fair everyone is so helpful and welcoming. No threat intended. í ½í¸¬í ½í±í ¼í¿»
just the thought of a spinner is threatening enough :P i just want to meet people, have some fun and see some good fights. Not fussed about getting smashed lol
Bookmarks