Despite the rules not making it a requirement for LiFePO4 batteries, I fit a fuse directly after my batteries but before they split off into the ESC and drive motors (I'll add a diagram of this shortly). For LiPo batteries, this is a mandatory requirement:
I would therefore think about adding that into your circuitry as well would be something to consider here. As for fuses for each part of the circuitry, the idea makes sense so I'd keep it.7.8.3 Fusing
A fuse rated below the maximum burst discharge of the battery MUST be fitted.The maximum burst discharge current is calculated by multiplying the C rating by the capacity. E.g. 25C 2200mAh = 55 Amp




Reply With Quote

Bookmarks