So I figured I'd give you all a small update on things. Unfortunately no vids or pictures to document it today, but I thought I'd let you all have a small progress update.

So, I took into consideration Mr Lownds's advice with the templating, and that somewhat seemed to do the job. I've managed to get a rather tight grip around the main area of the motor, and I need to cut out a little more on the sides of the motor itself, then I can get to work on another mount for the forward area, see if I can get a decent mount for that.

Unfortunately, in my haste to get it done... I gave my thumb a rather unfortunate collision with a 6 mm drill bit whilst drilling the base holes for said mount. So instead of managing to finish the mount up, I had to take a trip to the hospital to see if I did any serious damage. Thankfully, that wasn't the case, and I feel like a bit of a pillock pardon my language.

On that note, I'll try to stick with the current mounts I'm making, but if need be, if they don't end up working out, I'll give you a nudge Nat, and we'll go from there.

So a rather interesting day to say the least... least I should be sleeping decently tonight.