So after a whole load of thinking whilst building Shu!, I've decided on a electrically powered lifting arm for The Honey Badger, similar to that fitted to Shu!.

I have leftover HDPE from making the side panels that will form the basis of the arm and I'll mount the motor about 2/3s of the way up the wedge shape so the arm can, in theory, rotate past 180 degrees so can finally self right if it lands on its back panel or completely upside down. I tried adding side bars in Maidstone 2017 but they didn't last so I'll try again and actually bolt the things properly this time as well. :P

Dissasembled the wheel hubs this evening and both have a bolt bent in them so they won't come out... With a bent grub screw as well, I am going to get a new set and remind myself to use all 4 holes next time.

DSCF5951.JPG