Barróg - Featherweight Lifter Build Diary

[Shooty]

Right, so quick question. I'm planning on getting the Banebots T81 3 7/8 wheels, and I see that you need a custom hub for them as opposed to a simple hexnut. The only thing that has me worried is that the shafts are not threaded, whereas the drill gearbox is. Would I be able to use a 3/8 T81 hub on a 3/8 threaded drill shaft, or should I look for another solution, such as different wheels?

[Maxamuslead]

you could use those hubs and tap them to use the tread, but is there any reason you for 3 3/8 wheels, as you can get the 2-7/8 wheels in the t40 format which you can use with standard 3/8 unf JOINER nut, also you can get them in the uk http://www.robotshop.com/uk/rb-ban-94-orange-wheel.html.