Quote Originally Posted by daveimi View Post
Perfect! All that's left to put in is a switch or removable link on the live cable before it gets to the esc's. Also don't forget that you only need power from one esc to get to the receiver or it will pop. You do this by cutting the live or earth (can't remember which, am hoping someone will step in here) so that only the signal gets to the receiver and not several lots of amps. The reiver futuba type cables are live, earth n signal.
You usually cut the red wire to turn off the BEC power supply from the esc to the receiver (when you have a black, white and red wire).

I trimmed mine just before the connection to the receiver so the rest of the cable didn't peel apart along its length, cut a couple of mm off so it couldn't accidentally short together, and then taped the ends.