Quicruns

[lowndsy]

2 or 3 Amps no load, stall amps is 100 odd, but I hadn't even touched the controls, just plugged it in. I am only overvolting 12v motors to 14.8 4s, and the esc does support 4s, but maybe it is happier at lower volts. Keeping them as spares and switching to the Botzbitz.

When I had it running with drill motors I got around the different fw/rev esc speeds by just swapping the red and black wires when plugging one of the motors into the esc. There was still a tiny difference because the motors were wound to favour clockwise but nothing compared to when I reversed the channel input.

Steve