Unnamed FW crusher build diary

[Al_]

A quick clip of it having a go at the HDPE. it took a couple of bites to get through the 10mm stuff at 30% power, but that crusher tip is still a blunt piece of steel, I think once I have that sharpened up a bit it would go easier. At 50% power, the 10mm was no problem even with that tip, so time to bring on the thicker stuff. Also, please excuse the use of 2*4 offcuts and spring clamps to give me something to help hold the test piece on, filming and operating it all at once is tricky



Edit: Weirdly, the annotation boxes only show up for me if I watch the video on YouTube instead of directly in the thread. To save time for anyone with the same problem, the first test is 5mm HDPE at 30% power, the second is 10mm HDPE at 30% power and the final one is 10mm HDPE at 50% power.