Build Log | Caractacus - Any Tips?

[lowndsy]

Wireless Madness have a bunch of batteries that I haven't seen anywhere else. Not heard of the brands, but they were good for my rc gear the batteries have the connectors for balance chargers too which I didn't spot on the cheaper ones.

I was going to string 2 x 7.4v (for a 15V motor) together, but they have some 14.8 V ones that look tasty. What do people think of this one?

https://www.wirelessmadness.com/peak...ector-pek00554

[willcaddy]

Team RCC has a few Turnigy's in use. If the mAh and C rating is chosen well, no problem.

Thanks a lot :-)

Wireless Madness have a bunch of batteries that I haven't seen anywhere else. Not heard of the brands, but they were good for my rc gear the batteries have the connectors for balance chargers too which I didn't spot on the cheaper ones.

I was going to string 2 x 7.4v (for a 15V motor) together, but they have some 14.8 V ones that look tasty. What do people think of this one?

https://www.wirelessmadness.com/peak...ector-pek00554

Thanks xD

Just as a side note so im not doing anything dense lol but if you run 18v drill motors then the machine runs at 18v right? As apposed to doubling it to 36v (2 x 18v drills). I think I know the answer but just making sure ha ha!

Thanks again for all your help :-)