Rigid Robotics Build Diary - Flat Damon

[lowndsy]

So it looks like I'm an idiot and bought the wrong esc. I thought I could pass both outputs of my signal mixer through the dual esc and it would just share the power, but it looks like both motors would need to be on the same side of the bot.

Back to the drawing board...

[Eventorizon]

So it looks like I'm an idiot and bought the wrong esc. I thought I could pass both outputs of my signal mixer through the dual esc and it would just share the power, but it looks like both motors would need to be on the same side of the bot.

Back to the drawing board...

Can you put up a photo of your setup? If you are using a mixer AND a dual ESC which may have inbuilt mixing you might be mixing it twice. Or even 3 times if you also have mixing on your transmitter. But I may have the wrong end of the stick but its hard to tell without seeing.