New HW design - Omni Wheels and 30kW spinner

[overkill]

I back Alex's P90 recommendation but make sure you rate them conservatively. I just had a motor burn-out where the motor was connected with an MT60 connector; the connector looks OK but the plastic melted internally and fused the connector together - really not what you want in a power link!

[TechAUmNu]

I back Alex's P90 recommendation but make sure you rate them conservatively. I just had a motor burn-out where the motor was connected with an MT60 connector; the connector looks OK but the plastic melted internally and fused the connector together - really not what you want in a power link!

I will probably use either 2 per motor or make my own connectors with 8mm bullets and a 3d printed/milled case.